Hello
I have a hardware RAID DOS formatted under vxWorks NFS exported. This is mounted in Linux on a PP120. The RAID is ~288GB in size and the df ľk run under Linux usually reports the correct values until now. This is what I received:

Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hde3 17111928 3649120 12593560 23% /
/dev/hde1 99043 15024 78905 16% /boot
none 515172 0 515172 0% /dev/shm
xxxxxxx:/raid1 287076864 -4722366481770655252480 1099277163520 101% /mnt/raid1

The problem very well could be the NFS on vxWork but while I run that down I wanted to know if anyone had seen this before in Linux
Thanks
Robert