Help - Search - Members - Calendar
Full Version: Install Problems...
Linuxhelp > Support > Technical Support
Chibix
[quote=urpmi --auto-select]unable to take medium "main" into account as no list file [/var/lib/urpmi/list.main] exists
Everything already installed[/quote]

(Just checking)

[quote=installgame.sh]
ls: *.o: No such file or directory
./installgame.sh: line 1: bc: command not found
Error: You don't have dialog installed!
If dialog is located somewhere else than /bin/dialog,
then modify the PATH_DIALOG variable in the ./installgame.sh script![/quote]

[quote=abuse_sdl-0.7.0:configure]configure: error: *** SDL version 1.1.6 or above not found![/quote]

[quote=SDL-1.2.7-1.i386.rpm]Installation failed:
file /usr/lib/libSDL-1.2.so.0.7.0 from install of SDL-1.2.7-1 conflicts with package from libSDL1.2-1.2.7-2.mdk[/quote]

[quote=ayttm][root@localhost ayttm]# ayttm.rpm
Some package requested cannot be installed:
ayttm-0.4.6-3mdk.i586 (due to unsatisfied libstdc++.so.6)

[root@localhost ayttm]# configure
checking for ESD - version >= 0.2.7... no
*** Could not run ESD test program, checking why...
*** The test program compiled, but did not run. This usually means
*** that the run-time linker is not finding ESD or finding the wrong
*** version of ESD. If it is not finding ESD, you'll need to set your
*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point
*** to the installed location  Also, make sure you have run ldconfig if that
*** is required on your system
***
*** If you have an old version installed, it is best to remove it, although
*** you may also be able to get things to work by modifying LD_LIBRARY_PATH
checking for artsc-config... /usr/bin/artsc-config
checking for ARTS... automatic: no
*** Could not run ARTS test program, checking why...
*** The test program compiled, but did not run. This usually means
*** that the run-time linker is not finding ARTS or finding the wrong
*** version of ARTS. If it is not finding ARTS, you'll need to set your
*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point
*** to the installed location  Also, make sure you have run ldconfig if that
*** is required on your system
***
*** If you have an old version installed, it is best to remove it, although
*** you may also be able to get things to work by modifying LD_LIBRARY_PATH
checking for glib-config... no
checking for GLIB - version >= 1.2.0... no
*** The glib-config script installed by GLIB could not be found
*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the GLIB_CONFIG environment variable to the
*** full path to glib-config.
configure: error: Unable to find glib-devel version 1.2.0 or higher[/quote]
hughesjr
It looks like you are trying to install ayttm .... if so, just do:

urpmi ayttm
Chibix
[root@localhost Desktop] # urpmi ayttm
unable to take medium "main" into account as no list file [/var/lib/urpmi/list.main] exists
no package named ayttm


Not only ayttm, but also some pizza game, the coolest game in the world called 'abuse', and some other junk
adam.stokes
Not sure on MDK but perhaps there is a rpm db file that has been corrupted and needs to be rebuilt. Check MDK website on how to rebuild a rpm database
hughesjr
ayttm is part of the contrib section of most mandrake mirrors ...

Do you have your urpmi setup like in this thread:
http://www.linuxhelp.ca/forums/index.php?a...t=ST&f=7&t=3490

If you use a different mirror:
QUOTE
urpmi.addmedia Disk_2 http://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/10.0/i586/Mandrake/RPMS2 with ../base/synthesis.hdlist2.cz


would become:
QUOTE
urpmi.addmedia Disk_2 new_url_to_mirror/mandrakelinux/official/10.0/i586/Mandrake/RPMS2 with ../base/synthesis.hdlist2.cz


Then when you do:

urpmi.update -a

You should update the information ... using the above thread.

I would recommend using RPMs whenever possible, instead of building from source, on an RPM based linux distro. This is because RPMs contain references to other RPMs required for install ... Like SDL or SDL-devel. You should only build your own install from source if an install is not available as part of the distro. Installing from source will not show the required RPMs as installed and will cause install problems in the future.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2017 Invision Power Services, Inc.