Help - Search - Members - Calendar
Full Version: Kernel 2.6.0 Compilation
Linuxhelp > Support > Technical Support
Dear all

i have Red Hat 9 i am trying to install kernel 2.6.0 . kernel seems to
compiled ok but does not boot
give following error at boot all drive are detected before boot.

module-init-tools 0.9.9 installed
ext3 filesystem support was build in the kernel
aslo /dev file system support buildin
my root parttion is /dev/sda1 ( ext3)
my .config

Error Message ##

VFS: Cannot open root device "sda1" or unknown-block(0,0)
Please append a correct "root="boot option
Kernel Panic : VFS Uanble to mount root fs on unknown-block(0,0)

i have following Hardware

Intel Entry level Server motherboard
Pentitum III 1266 MHz processor
3 SCSI hard drive
no ide drive

i have tried many time with different option but with no luck

Thanks waiting for your reply

You may also need to compile into the kernel the driver that you need for the SCSI controller .... if you boot to your RH9, what driver is used for your SCSI card...

currently, the only SCSI driver you have in your .config is:

This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2018 Invision Power Services, Inc.