Linux Help
guides forums blogs
Home Desktops Distributions ISO Images Logos Newbies Reviews Software Support & Resources Linuxhelp Wiki

Welcome Guest ( Log In | Register )



Advanced DNS Management
New ZoneEdit. New Managment.

FREE DNS Is Back

Sign Up Now
 
Reply to this topicStart new topic
> Linux Boot
Headshot
post Jun 4 2006, 01:51 PM
Post #1


Whats this Lie-nix Thing?
*

Group: Members
Posts: 12
Joined: 4-April 06
Member No.: 6,234



Hi,

I installed almost all linux versions on my server pc at home.

Its a Pentuim 3 Compaq PC

Compaq Bios (2000)

After i installed a linux it works good.
But after 2/3 reboots i get a error like this

CODE
VFS: Cannot open root device "VolGroup00/LogVol00" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel Panic - Not syncing: VFS: Unable to mount root fs unknown-block(0,0)


Can somebody help me fix this?

thx smile.gif
Go to the top of the page
 
+Quote Post
Termina
post Jun 4 2006, 02:29 PM
Post #2


RMS is my Hero
******

Group: Support Specialist
Posts: 862
Joined: 18-February 04
From: Wisconsin
Member No.: 2,404



Why are you using LVM partitions?

Have you upgraded your kernel, and then rebooted? Have you created an initrd for yourself?

Please post your menu.lst (grub config).


--------------------
*Points finger at the author above him* They're a witch! Burn them!
---
Vist my website!
Join me in IRC! Server: st0rage.org Channel: #UnhandledExceptions
Go to the top of the page
 
+Quote Post
Headshot
post Jun 4 2006, 02:54 PM
Post #3


Whats this Lie-nix Thing?
*

Group: Members
Posts: 12
Joined: 4-April 06
Member No.: 6,234



QUOTE (Termina @ Jun 4 2006, 02:29 PM) *
Why are you using LVM partitions?

Have you upgraded your kernel, and then rebooted? Have you created an initrd for yourself?

Please post your menu.lst (grub config).



I just started with linux, i currently run CentOS.
At installation i choose for default install layout.

This is my Grub Config:

CODE
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# All kernel and initrd patsh are relative to /boot/, eg.
# root (hd0,0)
# Kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00
# initrd /initrd-version.img
#boot=/dev/hda
default=0
timeout=5
title CentOS (2.6.9-34.0.1.EL)
       root (hd0,0)
       kernel /vmlinuz-2.6.9-34.0.1.EL ro root=/dev/VolGroup00/LogVol00
       initrd /initrd-2.6.9-34.0.1.EL.img
title CentOS i386 (2.6.9-34.EL)
       root (hd0,0)
       kernel /vmlinuz-2.6.9-34.0.1.EL ro root=/dev/VolGroup00/LogVol00
       initrd /initrd-2.6.9-34.0.1.EL.img
Go to the top of the page
 
+Quote Post
michaelk
post Jun 4 2006, 04:12 PM
Post #4


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,797
Joined: 23-January 03
Member No.: 360



Did you change anthing i.e. installed applications prior to this error?
Look at the output of the console command dmesg. If you see lots of access errors then maybe the drive is going bad.
Go to the top of the page
 
+Quote Post
Headshot
post Jun 5 2006, 04:20 AM
Post #5


Whats this Lie-nix Thing?
*

Group: Members
Posts: 12
Joined: 4-April 06
Member No.: 6,234



Result of Dmesg

CODE
[root@localhost ~]# dmesg
Linux version 2.6.9-34.0.1.EL (buildcentos@build-i386) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 Wed May 24 07:40:56 CDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ed0000 (usable)
BIOS-e820: 0000000017ed0000 - 0000000017ef0000 (ACPI NVS)
BIOS-e820: 0000000017ef0000 - 0000000017f00000 (usable)
BIOS-e820: 00000000feea0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
383MB LOWMEM available.
Using x86 segment limits to approximate NX protection
zapping low mappings.
On node 0 totalpages: 98048
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 93952 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 COMPAQ                                ) @ 0x000e0010
ACPI: RSDT (v001 COMPAQ CPQ0004  0x20000825  0x00000000) @ 0x000e0080
ACPI: FADT (v001 COMPAQ SOLANO   0x00000001  0x00000000) @ 0x000e0130
ACPI: SSDT (v001 COMPAQ CORE_UTL 0x00000001 MSFT 0x0100000d) @ 0x000e136c
ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000d) @ 0x000e14e0
ACPI: SSDT (v001 COMPAQ     FHUB 0x00000001 MSFT 0x0100000d) @ 0x000e32eb
ACPI: MADT (v001 COMPAQ SOLANO   0x00000001  0x00000000) @ 0x000e01a4
ACPI: SSDT (v001 COMPAQ     APIC 0x00000001 MSFT 0x0100000d) @ 0x000e3275
ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000d) @ 0x000e2380
ACPI: SSDT (v001 COMPAQ       S3 0x00000001 MSFT 0x0100000d) @ 0x000e2a8b
ACPI: SSDT (v001 COMPAQ   PIDETM 0x00000001 MSFT 0x0100000d) @ 0x000e2c1d
ACPI: SSDT (v001 COMPAQ     GTF0 0x00000001 MSFT 0x0100000d) @ 0x000e2e81
ACPI: SSDT (v001 COMPAQ   SIDETM 0x00000001 MSFT 0x0100000d) @ 0x000e2d4f
ACPI: SSDT (v001 COMPAQ     GTF2 0x00000001 MSFT 0x0100000d) @ 0x000e307b
ACPI: DSDT (v001 COMPAQ     DSDT 0x00000001 MSFT 0x0100000d) @ 0x00000000
ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00
Initializing CPU#0
CPU 0 irqstacks, hard=c03e7000 soft=c03e6000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 864.115 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 383672k/392192k available (2118k kernel code, 7784k reserved, 668k data, 144k init, 0k highmem)
Calibrating delay using timer specific routine.. 1729.15 BogoMIPS (lpj=864578)
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU: After vendor identify, caps:  0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps:        0383f3ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 889k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xe838d, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1149498565.316:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key C75A858BA4956D41
- User ID: CentOS (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i815 Chipset.
agpgart: Maximum main memory to use for agp memory: 321M
agpgart: detected 4MB dedicated video ram.
agpgart: AGP aperture is 64M @ 0x44000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 1
ICH2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x2460-0x2467, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x2468-0x246f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD2000JB-00GVA0, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: _NEC DV-5800A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 144k freed
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
cdrom: open failed.
security:  3 users, 4 roles, 354 types, 26 bools
security:  55 classes, 21833 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext2), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
inserting floppy driver for 2.6.9-34.0.1.EL
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
PCI: Found IRQ 5 for device 0000:02:08.0
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0x40000000, irq 5, MAC addr 00:02:A5:62:C5:84
PCI: Found IRQ 11 for device 0000:00:1f.5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50053 usecs
intel8x0: clocking to 41157
hw_random hardware driver 1.0.0 loaded
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 5 for device 0000:00:1f.4
uhci_hcd 0000:00:1f.4: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: irq 5, io base 00002440
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
cdrom: open failed.
SELinux: initialized (dev hda1, type ext2), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 786424k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: CPU0 already at revision 0x8 (current=0x8)
microcode: No new microdata for cpu 0
IA-32 Microcode Update Driver v1.14 unregistered
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
i2c /dev entries driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0378f60(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present
Go to the top of the page
 
+Quote Post
Headshot
post Jun 6 2006, 04:10 PM
Post #6


Whats this Lie-nix Thing?
*

Group: Members
Posts: 12
Joined: 4-April 06
Member No.: 6,234



Does somebody know the problem ? sad.gif
Go to the top of the page
 
+Quote Post
Headshot
post Jun 8 2006, 03:34 PM
Post #7


Whats this Lie-nix Thing?
*

Group: Members
Posts: 12
Joined: 4-April 06
Member No.: 6,234



After some searching on google, i found out that i have to change this:
CODE
root (hd0,0)
kernel /vmlinuz-2.6.9-34.0.1.EL ro root=/dev/VolGroup00/LogVol00
initrd /initrd-2.6.9-34.0.1.EL.img



Into This:

CODE
root (hd0,0)
kernel /vmlinuz-2.6.9-34.0.1.EL
initrd /initrd-2.6.9-34.0.1.EL.img


I have to change this in grub config. but i don't know how sad.gif
Could somebody tell me how to do this smile.gif
please don't explain to diffecult tongue.gif i'm a newb to linux

thx biggrin.gif

Peace
Go to the top of the page
 
+Quote Post
DS2K3
post Jun 8 2006, 04:35 PM
Post #8


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,284
Joined: 14-November 04
From: Southampton, Hampshire
Member No.: 4,165



Just open /boot/grub/grub.conf (That's a pretty normal location, but might vary) using your nomral text editor and change the lines. Save the file, and reboot You proabbly have a program caled "vi" installed. Vi is a text editor, but it can take a bit of getting used to. To start typing text, press "i" first. (You alos need to do it before using backsapce, but not the "delete" key). To save the file, press "esc" to get out of editing mode and then type ":wq" to write the file and quit


--------------------
Fixed your problem? Let us know!
richard@linuxhelp.net

www.Gathr.co.uk Online Event Management
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 21st October 2017 - 07:12 AM