Linux Help
guides forums blogs
Home Desktops Distributions ISO Images Logos Newbies Reviews Software Support & Resources Linuxhelp Wiki

Welcome Guest ( Log In | Register )



Advanced DNS Management
New ZoneEdit. New Managment.

FREE DNS Is Back

Sign Up Now
 
Reply to this topicStart new topic
> Startx Won't Start X?, X Window problem after crash
mrhawk1
post Apr 16 2003, 09:21 AM
Post #1


Whats this Lie-nix Thing?
*

Group: Members
Posts: 2
Joined: 16-April 03
Member No.: 680



I've had my linux machine purring along since January without a hitch. Earlier this week the system was shutdown by one of the kids using the power switch.
Now I can only boot into the command prompt. If I try a "startx", I get a "caught signal 11" error.

My XFree86.0.log and XFConfig-4 files are shown below. I would appreciate any insight offered as I am not anxious to reload the entire OS from scratch.

Ken

Machine Info: 1.2Ghz Athlon/256Mb RAM


#*************XFree86.0.log*****************
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Apr 15 20:47:19 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "device1"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
Using vt 7
(--) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0305 card 1043,8033 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8305 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:04:0: chip 1106,0686 card 1043,8033 rev 22 class 06,01,00 hdr 80
(II) PCI: 00:04:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a hdr 00
(II) PCI: 00:04:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:04:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:04:4: chip 1106,3057 card 1043,8033 rev 30 class 06,00,00 hdr 00
(II) PCI: 00:0a:0: chip 4005,4000 card 4005,4000 rev 00 class 04,01,00 hdr 00
(II) PCI: 00:0d:0: chip 1186,1300 card 1186,1301 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:11:0: chip 105a,0d30 card 105a,4d33 rev 02 class 01,80,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4742 card 1002,0084 rev 5c class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xe1800000 - 0xe3dfffff (0x2600000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xe3f00000 - 0xe3ffffff (0x100000) MX[B]
(II) Bus -1: bridge is at (0:4:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus -1: bridge is at (0:4:4), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) ATI Mach64 GB rev 92, Mem @ 0xe2000000/24, 0xe1800000/12, I/O @ 0xd800/8, BIOS @ 0xe3fe0000/17
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xe0800000 - 0xe081ffff (0x20000) MX[B]
[1] -1 0xe1000000 - 0xe10000ff (0x100) MX[B]
[2] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[3] -1 0xe3fe0000 - 0xe3ffffff (0x20000) MX[B](B)
[4] -1 0xe1800000 - 0xe1800fff (0x1000) MX[B](B)
[5] -1 0xe2000000 - 0xe2ffffff (0x1000000) MX[B](B)
[6] -1 0x00007400 - 0x0000743f (0x40) IX[B]
[7] -1 0x00007800 - 0x00007803 (0x4) IX[B]
[8] -1 0x00008000 - 0x00008007 (0x8) IX[B]
[9] -1 0x00008400 - 0x00008403 (0x4) IX[B]
[10] -1 0x00008800 - 0x00008807 (0x8) IX[B]
[11] -1 0x00009000 - 0x000090ff (0x100) IX[B]
[12] -1 0x00009400 - 0x0000947f (0x80) IX[B]
[13] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]
[14] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[15] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]
[16] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xe0800000 - 0xe081ffff (0x20000) MX[B]
[1] -1 0xe1000000 - 0xe10000ff (0x100) MX[B]
[2] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[3] -1 0xe3fe0000 - 0xe3ffffff (0x20000) MX[B](B)
[4] -1 0xe1800000 - 0xe1800fff (0x1000) MX[B](B)
[5] -1 0xe2000000 - 0xe2ffffff (0x1000000) MX[B](B)
[6] -1 0x00007400 - 0x0000743f (0x40) IX[B]
[7] -1 0x00007800 - 0x00007803 (0x4) IX[B]
[8] -1 0x00008000 - 0x00008007 (0x8) IX[B]
[9] -1 0x00008400 - 0x00008403 (0x4) IX[B]
[10] -1 0x00008800 - 0x00008807 (0x8) IX[B]
[11] -1 0x00009000 - 0x000090ff (0x100) IX[B]
[12] -1 0x00009400 - 0x0000947f (0x80) IX[B]
[13] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]
[14] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[15] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]
[16] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe0800000 - 0xe081ffff (0x20000) MX[B]
[6] -1 0xe1000000 - 0xe10000ff (0x100) MX[B]
[7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[8] -1 0xe3fe0000 - 0xe3ffffff (0x20000) MX[B](B)
[9] -1 0xe1800000 - 0xe1800fff (0x1000) MX[B](B)
[10] -1 0xe2000000 - 0xe2ffffff (0x1000000) MX[B](B)
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x00007400 - 0x0000743f (0x40) IX[B]
[14] -1 0x00007800 - 0x00007803 (0x4) IX[B]
[15] -1 0x00008000 - 0x00008007 (0x8) IX[B]
[16] -1 0x00008400 - 0x00008403 (0x4) IX[B]
[17] -1 0x00008800 - 0x00008807 (0x8) IX[B]
[18] -1 0x00009000 - 0x000090ff (0x100) IX[B]
[19] -1 0x00009400 - 0x0000947f (0x80) IX[B]
[20] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]
[21] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[22] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]
[23] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.3123
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 6.4.7
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) ATI: ATI driver (version 6.4.7) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LX (AGP),
ATI Radeon Mobility LY (AGP), ATI Radeon Mobility LZ (AGP),
ATI Radeon 8500 QL (AGP), ATI Radeon 8500 BB (AGP),
ATI Radeon 7500 QW (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate "Device" section "device1".
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 detected.
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 assigned to active "Device" section "device1".
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe0800000 - 0xe081ffff (0x20000) MX[B]
[6] -1 0xe1000000 - 0xe10000ff (0x100) MX[B]
[7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[8] -1 0xe3fe0000 - 0xe3ffffff (0x20000) MX[B](B)
[9] -1 0xe1800000 - 0xe1800fff (0x1000) MX[B](B)
[10] -1 0xe2000000 - 0xe2ffffff (0x1000000) MX[B](B)
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x00007400 - 0x0000743f (0x40) IX[B]
[14] -1 0x00007800 - 0x00007803 (0x4) IX[B]
[15] -1 0x00008000 - 0x00008007 (0x8) IX[B]
[16] -1 0x00008400 - 0x00008403 (0x4) IX[B]
[17] -1 0x00008800 - 0x00008807 (0x8) IX[B]
[18] -1 0x00009000 - 0x000090ff (0x100) IX[B]
[19] -1 0x00009400 - 0x0000947f (0x80) IX[B]
[20] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]
[21] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[22] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]
[23] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 6.4.7
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe0800000 - 0xe081ffff (0x20000) MX[B]
[6] -1 0xe1000000 - 0xe10000ff (0x100) MX[B]
[7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[8] -1 0xe3fe0000 - 0xe3ffffff (0x20000) MX[B](B)
[9] -1 0xe1800000 - 0xe1800fff (0x1000) MX[B](B)
[10] -1 0xe2000000 - 0xe2ffffff (0x1000000) MX[B](B)
[11] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x00007400 - 0x0000743f (0x40) IX[B]
[17] -1 0x00007800 - 0x00007803 (0x4) IX[B]
[18] -1 0x00008000 - 0x00008007 (0x8) IX[B]
[19] -1 0x00008400 - 0x00008403 (0x4) IX[B]
[20] -1 0x00008800 - 0x00008807 (0x8) IX[B]
[21] -1 0x00009000 - 0x000090ff (0x100) IX[B]
[22] -1 0x00009400 - 0x0000947f (0x80) IX[B]
[23] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]
[24] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[25] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]
[26] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[27] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[28] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) ATI(0): Chipset: "ati".
(**) ATI(0): Depth 24, (--) framebuffer bpp 32
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 2.0
(II) ATI(0): VESA VBE Total Mem: 8192 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(II) ATI(0): VESA VBE OEM Software Rev: 1.0
(II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) ATI(0): VESA VBE OEM Product: MACH64GT
(II) ATI(0): VESA VBE OEM Product Rev: 01.00
(II) ATI(0): VESA VBE DDC supported
(II) ATI(0): VESA VBE DDC Level 2
(II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.
(II) ATI(0): VESA VBE DDC read successfully
(II) ATI(0): Manufacturer: PGS Model: 51 Serial#: 372093397
(II) ATI(0): Year: 1997 Week: 13
(II) ATI(0): EDID Version: 1.0
(II) ATI(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) ATI(0): Sync: Separate
(II) ATI(0): Max H-Image Size [cm]: horiz.: 27 vert.: 20
(II) ATI(0): Gamma: 1.00
(II) ATI(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) ATI(0): redX: 0.625 redY: 0.340 greenX: 0.310 greenY: 0.592
(II) ATI(0): blueX: 0.149 blueY: 0.062 whiteX: 0.281 whiteY: 0.312
(II) ATI(0): Supported VESA Video Modes:
(II) ATI(0): 720x400@70Hz
(II) ATI(0): 640x480@60Hz
(II) ATI(0): 640x480@67Hz
(II) ATI(0): 640x480@72Hz
(II) ATI(0): 640x480@75Hz
(II) ATI(0): 800x600@56Hz
(II) ATI(0): 800x600@60Hz
(II) ATI(0): 800x600@72Hz
(II) ATI(0): 800x600@75Hz
(II) ATI(0): 832x624@75Hz
(II) ATI(0): 1024x768@87Hz (interlaced)
(II) ATI(0): 1024x768@60Hz
(II) ATI(0): Manufacturer's mask: 0
(II) ATI(0): Supported Future Video Modes:
(II) ATI(0): #0: hsize: 640 vsize 480 refresh: 70 vid: 18993
(II) ATI(0): #1: hsize: 640 vsize 480 refresh: 84 vid: 22577
(II) ATI(0): Supported additional Video Mode:
(II) ATI(0): clock: 25.2 MHz Image Size: 255 x 190 mm
(II) ATI(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) ATI(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
(II) ATI(0): Supported additional Video Mode:
(II) ATI(0): clock: 31.5 MHz Image Size: 255 x 190 mm
(II) ATI(0): h_active: 640 h_sync: 664 h_sync_end 704 h_blank_end 832 h_border: 0
(II) ATI(0): v_active: 400 v_sync: 409 v_sync_end 412 v_blanking: 450 v_border: 0
(II) ATI(0): Supported additional Video Mode:
(II) ATI(0): clock: 31.5 MHz Image Size: 255 x 190 mm
(II) ATI(0): h_active: 640 h_sync: 664 h_sync_end 704 h_blank_end 832 h_border: 0
(II) ATI(0): v_active: 350 v_sync: 385 v_sync_end 388 v_blanking: 450 v_border: 0
(--) ATI(0): ATI 3D Rage Pro graphics controller detected.
(--) ATI(0): Chip type 4742 "GB", version 4, foundry UMC, class 0, revision 0x01.
(--) ATI(0): AGP bus interface detected; block I/O base is 0xD800.
(--) ATI(0): ATI Mach64 adapter detected.
(!!) ATI(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(II) ATI(0): Storing hardware cursor image at 0xE27FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xE2000000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xE1800400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xE1800000.
(==) ATI(0): Write-combining range (0xe2000000,0x800000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(0): monitor1: Using hsync value of 48.00 kHz
(II) ATI(0): monitor1: Using vrefresh range of 50.00-120.00 Hz
(II) ATI(0): Maximum clock: 199.00 MHz
(II) ATI(0): Not using mode "768x576" (hsync out of range)
(II) ATI(0): Not using mode "768x576" (hsync out of range)
(II) ATI(0): Not using default mode "640x350" (hsync out of range)
(II) ATI(0): Not using default mode "320x175" (hsync out of range)
(II) ATI(0): Not using default mode "640x400" (hsync out of range)
(II) ATI(0): Not using default mode "320x200" (hsync out of range)
(II) ATI(0): Not using default mode "720x400" (hsync out of range)
(II) ATI(0): Not using default mode "360x200" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "320x240" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "320x240" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "320x240" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "320x240" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "400x300" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "400x300" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "400x300" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "400x300" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1152x864" (hsync out of range)
(II) ATI(0): Not using default mode "576x432" (hsync out of range)
(II) ATI(0): Not using default mode "1280x960" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "1280x960" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "896x672" (hsync out of range)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "896x672" (hsync out of range)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "928x696" (hsync out of range)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "928x696" (hsync out of range)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (hsync out of range)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (hsync out of range)
(II) ATI(0): Not using default mode "832x624" (hsync out of range)
(II) ATI(0): Not using default mode "416x312" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (hsync out of range)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (hsync out of range)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1024" (hsync out of range)
(II) ATI(0): Not using default mode "800x512" (hsync out of range)
(II) ATI(0): Not using mode "640x480" (no mode of this name)
(--) ATI(0): Virtual size is 800x600 (pitch 800)
(**) ATI(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) ATI(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(--) ATI(0): Display dimensions: (270, 200) mm
(--) ATI(0): DPI set to (75, 76)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xe1800000 - 0xe1800fff (0x1000) MS[B]
[1] 0 0xe2000000 - 0xe2ffffff (0x1000000) MS[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xe0800000 - 0xe081ffff (0x20000) MX[B]
[8] -1 0xe1000000 - 0xe10000ff (0x100) MX[B]
[9] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[10] -1 0xe3fe0000 - 0xe3ffffff (0x20000) MX[B](B)
[11] -1 0xe1800000 - 0xe1800fff (0x1000) MX[B](B)
[12] -1 0xe2000000 - 0xe2ffffff (0x1000000) MX[B](B)
[13] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[14] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[15] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[16] 0 0x0000d800 - 0x0000d8ff (0x100) IS[B]
[17] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0x00007400 - 0x0000743f (0x40) IX[B]
[20] -1 0x00007800 - 0x00007803 (0x4) IX[B]
[21] -1 0x00008000 - 0x00008007 (0x8) IX[B]
[22] -1 0x00008400 - 0x00008403 (0x4) IX[B]
[23] -1 0x00008800 - 0x00008807 (0x8) IX[B]
[24] -1 0x00009000 - 0x000090ff (0x100) IX[B]
[25] -1 0x00009400 - 0x0000947f (0x80) IX[B]
[26] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]
[27] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[28] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]
[29] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[30] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[31] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) ATI(0): Write-combining range (0xe2000000,0x800000)
(II) ATI(0): Largest offscreen areas (with overlaps):
(II) ATI(0): 800 x 2021 rectangle at 0,600
(II) ATI(0): 96 x 2022 rectangle at 0,600
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
14 256x256 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(**) Option "dpms"
(**) ATI(0): DPMS enabled
(II) ATI(0): ecp_div is 0
(II) ATI(0): 0x55 0xaa
(II) ATI(0): No MM_TABLE found
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.5
(II) ATI(0): I2C bus "Rage Pro i2c bus" initialized.
(II) ATI(0): StartTimeout = 5
(II) ATI(0): Detecting addon board, trying default i2c mode
(II) Loading sub module "fi1236"
(II) LoadModule: "fi1236"
(II) Loading /usr/X11R6/lib/modules/multimedia/fi1236_drv.o
(II) Module fi1236: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "bt829"
(II) LoadModule: "bt829"
(II) Loading /usr/X11R6/lib/modules/multimedia/bt829_drv.o
(II) Module bt829: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) [GLX]: Calling GlxExtensionInit

Fatal server error:
Caught signal 11. Server aborting


When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

(II) ATI(0): Shutting down Xvideo subsystems

#***************XF86Config-4*****************
# File generated by xf86config.

#
# Copyright © 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#

Section "Module"
# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"

# This loads the GLX module
# Load "glx"
Load "glx" # 3D layer

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

Subsection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubsection
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"
EndSection
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the / mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"
# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xfree86"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"
# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Princeton"
ModelName "Princeton Ultra 40"
HorizSync 48.0
VertRefresh 50.0-120.0

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device1"
BoardName "ATI Mach64 GT (264GT), aka 3D RAGE"
Driver "ati"
Option "DPMS"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubsection

Subsection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubsection

Subsection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubsection

Subsection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Screen "screen1"
EndSection
Go to the top of the page
 
+Quote Post
jetblackz
post Apr 16 2003, 03:06 PM
Post #2


./configure
***

Group: Members
Posts: 98
Joined: 1-April 03
Member No.: 613



su
xf86config


--------------------
Go to the top of the page
 
+Quote Post
mrhawk1
post Apr 16 2003, 08:19 PM
Post #3


Whats this Lie-nix Thing?
*

Group: Members
Posts: 2
Joined: 16-April 03
Member No.: 680



Jetblackz . . . you must be a genius.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 18th October 2017 - 11:49 AM