Linux Help
guides forums blogs
Home Desktops Distributions ISO Images Logos Newbies Reviews Software Support & Resources Linuxhelp Wiki

Welcome Guest ( Log In | Register )



Advanced DNS Management
New ZoneEdit. New Managment.

FREE DNS Is Back

Sign Up Now
2 Pages V   1 2 >  
Reply to this topicStart new topic
> Installing a tape drive.
RuralTurtle
post Jan 23 2006, 12:54 PM
Post #1


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 23-January 06
Member No.: 5,997



Hello. I have Redhat 8.0 on a laptop. It's working good.

I wanted to install the tape drive that is already physically attached to it. The tape drive worked fine under Windows98SE. It's one of those parallel QIC-80 drives and I confirmed that it is supported by FTape. It appears that FTape is already installed on the kernel (2.4.18-14 i586) per Ftape documentation and because I see /dev/ftape.

Okay, now for the newbie-esque questions. What do I do next? How do I setup this up under Linux? How would I test it? Is there a way to setup an automatic backup of a given folder for each evening via cron? Is there a way to span tapes?

Thanks a lot for your help. I'm newer at Linux, so not sure what to do next. Thanks again.
Go to the top of the page
 
+Quote Post
michaelk
post Jan 23 2006, 01:52 PM
Post #2


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,797
Joined: 23-January 03
Member No.: 360



The simplest method would be to use tar. Example
To save
tar -cvf /dev/tape /directory/to/be/saved/
to restore
tar -xvf /dev/tape


See man pages or google for additional info.
There are different backup utilities for linux. Check out sourceforge and of course google. Like
http://www.linuxlinks.com/Software/Backup/index.shtml

And yes you can schedule daily backups etc via cron.
Go to the top of the page
 
+Quote Post
RuralTurtle
post Jan 23 2006, 02:06 PM
Post #3


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 23-January 06
Member No.: 5,997



Thanks for the quick response. Wouldn't I have to tell the OS that the drive is on the parallel port first? It seems to me when I tried to send a tar file to the tape I got some message about it not being a blocking device or something.

Thanks again & sorry for the newbie-ishness. smile.gif
Go to the top of the page
 
+Quote Post
michaelk
post Jan 23 2006, 03:24 PM
Post #4


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,797
Joined: 23-January 03
Member No.: 360



I've never used a parallel port tape drive. AFAIK you do not have to specify the port. Do you have more then one parallel port? Here is the howto
http://ldp.nedmirror.nl/HOWTO/Ftape-HOWTO.html#toc3

Make sure the lp module is not loaded
rmmod lp

What is the output of the command:
ls -l /dev/tape
Go to the top of the page
 
+Quote Post
RuralTurtle
post Jan 23 2006, 04:22 PM
Post #5


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 23-January 06
Member No.: 5,997



Thanks again for your reply. I did look thru the FTape HowTo and didn't find anything specific to par tape drives.

When I do ls -l /dev/tape, Linux just returns the name of the folder & that's it. If I send a tarball to /dev/tape it just returns me to the prompt w/o any type of error. The tape drive doesn't light up or start steaming anything.

When I installed Redhat, the drive wasn't physically attached during the install, if that matters. I thought it would be easy enough to install after the fact.

Thanks again. I really appreciate your help. I would like to get this going as it is the only off-HD storage available for this particular unit.
Go to the top of the page
 
+Quote Post
michaelk
post Jan 23 2006, 05:09 PM
Post #6


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,797
Joined: 23-January 03
Member No.: 360



Do you know the make / model of the tape drive?
Go to the top of the page
 
+Quote Post
RuralTurtle
post Jan 23 2006, 05:31 PM
Post #7


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 23-January 06
Member No.: 5,997



Yes, it's a Conner QIC-80 Parallel tape drive. It's one of the standard type drives that were around a few years back. It worked under Windows98SE and MS-DOS. I checked on the FTape home page, and it appears that it is supported.

I guess I don't know how to mount or access it once the device is attached. There are commands for SCSI types I've seen, but not sure about a ppt one.

Again, many thanks for helping me with this. I really appreciate it.
Go to the top of the page
 
+Quote Post
RuralTurtle
post Jan 26 2006, 07:27 AM
Post #8


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 23-January 06
Member No.: 5,997



Any ideas? Thanks.
Go to the top of the page
 
+Quote Post
michaelk
post Jan 26 2006, 08:31 AM
Post #9


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,797
Joined: 23-January 03
Member No.: 360



Try the command
mt -f /dev/ftape status

To archive example:
tar -cvf /dev/ftape /home/username/directory_to_backup
Go to the top of the page
 
+Quote Post
RuralTurtle
post Jan 26 2006, 03:16 PM
Post #10


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 23-January 06
Member No.: 5,997



Thanks again for your help.

The first command that checks the status says:
/dev/ftape: No such device.

Yet if I 'ls' the dev folder, I see a ftape.

The second command yields:
ar: /dev/ftape: Cannot open: No such device
tar: Error is not recoverable: exiting now

I'm not sure how I am to proceed.
Go to the top of the page
 
+Quote Post
DS2K3
post Jan 27 2006, 06:41 AM
Post #11


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,284
Joined: 14-November 04
From: Southampton, Hampshire
Member No.: 4,165



Are you running as root?


--------------------
Fixed your problem? Let us know!
richard@linuxhelp.net

www.Gathr.co.uk Online Event Management
Go to the top of the page
 
+Quote Post
RuralTurtle
post Jan 27 2006, 06:43 AM
Post #12


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 23-January 06
Member No.: 5,997



Yes, I am logged in as root.
Go to the top of the page
 
+Quote Post
michaelk
post Jan 27 2006, 02:07 PM
Post #13


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,797
Joined: 23-January 03
Member No.: 360



Is ftape module loading? Post the output of lsmod.
I haven't found any really info on parallel port tape drives with linux.
Go to the top of the page
 
+Quote Post
RuralTurtle
post Jan 27 2006, 03:26 PM
Post #14


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 23-January 06
Member No.: 5,997



Ah, perhaps not. I did an lsmod & don't see it on the list. How would I load it?

BTW, here is the output per your request. Again, many thanks.

Module Size Used by Tainted: P
ide-cd 31432 0 (autoclean)
cdrom 30976 0 (autoclean) [ide-cd]
via82cxxx_audio 21304 0 (autoclean)
uart401 8068 0 (autoclean) [via82cxxx_audio]
ac97_codec 12136 0 (autoclean) [via82cxxx_audio]
sound 70196 0 (autoclean) [via82cxxx_audio uart401]
soundcore 6180 4 (autoclean) [via82cxxx_audio sound]
autofs 12228 0 (autoclean) (unused)
ipt_REJECT 3448 6 (autoclean)
iptable_filter 2316 1 (autoclean)
ip_tables 14456 2 [ipt_REJECT iptable_filter]
tulip 42304 0 (unused)
ds 8136 1
yenta_socket 12320 1
pcmcia_core 51168 0 [ds yenta_socket]
driverloader 314832 1
mousedev 5236 1
keybdev 2688 0 (unused)
hid 20836 0 (unused)
input 5664 0 [mousedev keybdev hid]
usb-uhci 24524 0 (unused)
usbcore 71680 1 [driverloader hid usb-uhci]
ext3 64224 2
jbd 48180 2 [ext3]
Go to the top of the page
 
+Quote Post
michaelk
post Jan 27 2006, 05:25 PM
Post #15


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,797
Joined: 23-January 03
Member No.: 360



modprobe ftape
Go to the top of the page
 
+Quote Post
RuralTurtle
post Jan 28 2006, 02:35 PM
Post #16


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 23-January 06
Member No.: 5,997



Thanks. When I try that command, it just returns me to the prompt. Then if I try to send a tar ball to the device, I get:

tar: /dev/ftape: Cannot open: No such device
tar: Error is not recoverable: exiting now
Go to the top of the page
 
+Quote Post
michaelk
post Jan 29 2006, 05:29 AM
Post #17


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,797
Joined: 23-January 03
Member No.: 360



No response from a command means it was successfull. Look at the output of the dmesg command to see if there are any messaages relating to the tape drive.
Go to the top of the page
 
+Quote Post
RuralTurtle
post Jan 29 2006, 11:43 AM
Post #18


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 23-January 06
Member No.: 5,997



Thanks again. Yes, there is some output. It's Greek to me.

ftape v3.04d 25/11/97
© 1993-1996 Bas Laarhoven (bas@vimec.nl)
© 1995-1996 Kai Harrekilde-Petersen (khp@dolphinics.no)
© 1996-1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)
QIC-117 driver for QIC-40/80/3010/3020 floppy tape drives
Compiled for Linux version 2.4.18-14 with versioned symbols
[000] ftape-init.c (ftape_init) - installing QIC-117 floppy tape hardware drive
... .
[001] ftape-init.c (ftape_init) - ftape_init @ 0xca9a6060.
[002] ftape-buffer.c (add_one_buffer) - buffer nr #1 @ c83f63e0, dma area @ c0
848000.
[003] ftape-buffer.c (add_one_buffer) - buffer nr #2 @ c83f6e60, dma area @ c0
840000.
[004] ftape-buffer.c (add_one_buffer) - buffer nr #3 @ c83f6860, dma area @ c0
838000.
[005] ftape-calibr.c (time_inb) - inb() duration: 2218 nsec.
[006] ftape-calibr.c (ftape_calibrate) - TC for `ftape_udelay()' = 210 nsec (at
40959 counts).
[007] ftape-calibr.c (ftape_calibrate) - TC for `fdc_wait()' = 4346 nsec (at 12
79 counts).
Go to the top of the page
 
+Quote Post
michaelk
post Jan 29 2006, 12:05 PM
Post #19


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,797
Joined: 23-January 03
Member No.: 360



I was hoping for something that referenced a device ID or showed recognized the drive. Anything else from the output listing?
Go to the top of the page
 
+Quote Post
RuralTurtle
post Jan 30 2006, 03:30 PM
Post #20


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 23-January 06
Member No.: 5,997



Sorry, I only blocked & copied the stuff for ftape. Here is the complete list.

Linux version 2.4.18-14 (bhcompile@stripples.devel.redhat.com) (gcc version 3.2
20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 11:57:57 EDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000009bf0000 (usable)
BIOS-e820: 0000000009bf0000 - 0000000009bffc00 (ACPI data)
BIOS-e820: 0000000009bffc00 - 0000000009c00000 (ACPI NVS)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
155MB LOWMEM available.
On node 0 totalpages: 39920
zone(0): 4096 pages.
zone(1): 35824 pages.
zone(2): 0 pages.
Compaq 12XL125 machine detected. Enabling interrupts during APM calls.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 398.527 MHz processor.
Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Console: colour VGA+ 80x25
Calibrating delay loop... 794.62 BogoMIPS
Memory: 153184k/159680k available (1193k kernel code, 4864k reserved, 984k data,
200k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 4096 (order: 3, 32768 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=19303 max_file_pages=0 max_inodes=0 max_dentries=19303
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002
CPU: After generic, caps: 008021bf 808029bf 00000000 00000002
CPU: Common caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6™ 3D processor stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: AMD K6
PCI: PCI BIOS revision 2.10 entry at 0xfd83e, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SER
IAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
block: 288 slots per queue, batch=72
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 19) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1828-0x182f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK4313MAT, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-7002B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 8452080 sectors (4327 MB), CHS=559/240/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 125k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 200k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 12:17:47 Sep 4 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0xbaf/0x118) is not claimed by any active driver.
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,2), internal journal
Adding Swap: 325072k swap-space (priority -1)
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
PCI: Assigned IRQ 9 for device 00:0a.0
Yenta IRQ list 0008, PCI irq9
Socket status: 30000020
cs: cb_alloc(bus 2): vendor 0x1011, device 0x0019
PCI: Enabling device 02:00.0 (0000 -> 0003)
driverloader: stack=8192/1464/0
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x378-0x37f 0x388-0x38f 0
x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
usb.c: registered new driver driverloader
driverloader: rsc4us1.sys: 0xca8e5000..0xca941d00 entry = ca90914a (pbase = 0x10
000)
divert: allocating divert_blk for eth0
Linux Tulip driver version 0.9.15-pre11 (May 11, 2002)
PCI: Setting latency timer of device 02:00.0 to 64
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip0: MII transceiver #1 config 1000 status 7849 advertising 01e1.
eth0: New link status: Disconnected (0002)
eth0: WPA, AES, TKIP, WEP128, WEP64 supported
eth0: U.S. Robotics Wireless USB Adapter at USB-0000:00:00.0-1:2-0BAF:0118 (MAC
address 00:C0:49:53:54:FD) ready
divert: allocating divert_blk for eth1
eth1: Digital DS21143 Tulip rev 65 at 0xca94f000, 00:10:7A:61:01:0A, IRQ 9.
parport0: PC-style at 0x378 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378
ohci1394: pci_module_init failed
ip_tables: © 2000-2002 Netfilter core team
driverloader: NdisWrapStatusToErrno: unknown: NDIS_STATUS_BUFFER_OVERFLOW
eth0: Error -5 setting txpower (0)
eth0: New link status: Connected (0001)
mtrr: no more MTRRs available
Via 686a audio driver 1.9.1
PCI: Found IRQ 11 for device 00:07.5
ac97_codec: AC97 Audio codec, id: 0x4144:0x5340 (Analog Devices AD1881)
via82cxxx: board #1 at 0x1000, IRQ 11
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
ide-floppy driver 0.99.newide
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
ISO 9660 Extensions: Microsoft Joliet Level 3
[root@localhost root]# ls
anaconda-ks.cfg install.log install.log.syslog RealPlayer v
[root@localhost root]# modprobe ftape
[root@localhost root]# dmesg
Linux version 2.4.18-14 (bhcompile@stripples.devel.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 11:57:57 EDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000009bf0000 (usable)
BIOS-e820: 0000000009bf0000 - 0000000009bffc00 (ACPI data)
BIOS-e820: 0000000009bffc00 - 0000000009c00000 (ACPI NVS)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
155MB LOWMEM available.
On node 0 totalpages: 39920
zone(0): 4096 pages.
zone(1): 35824 pages.
zone(2): 0 pages.
Compaq 12XL125 machine detected. Enabling interrupts during APM calls.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 398.527 MHz processor.
Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Console: colour VGA+ 80x25
Calibrating delay loop... 794.62 BogoMIPS
Memory: 153184k/159680k available (1193k kernel code, 4864k reserved, 984k data, 200k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 4096 (order: 3, 32768 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=19303 max_file_pages=0 max_inodes=0 max_dentries=19303
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002
CPU: After generic, caps: 008021bf 808029bf 00000000 00000002
CPU: Common caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6™ 3D processor stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: AMD K6
PCI: PCI BIOS revision 2.10 entry at 0xfd83e, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
block: 288 slots per queue, batch=72
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 19) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1828-0x182f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK4313MAT, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-7002B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 8452080 sectors (4327 MB), CHS=559/240/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 125k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 200k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 12:17:47 Sep 4 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0xbaf/0x118) is not claimed by any active driver.
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,2), internal journal
Adding Swap: 325072k swap-space (priority -1)
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
PCI: Assigned IRQ 9 for device 00:0a.0
Yenta IRQ list 0008, PCI irq9
Socket status: 30000020
cs: cb_alloc(bus 2): vendor 0x1011, device 0x0019
PCI: Enabling device 02:00.0 (0000 -> 0003)
driverloader: stack=8192/1464/0
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
usb.c: registered new driver driverloader
driverloader: rsc4us1.sys: 0xca8e5000..0xca941d00 entry = ca90914a (pbase = 0x10000)
divert: allocating divert_blk for eth0
Linux Tulip driver version 0.9.15-pre11 (May 11, 2002)
PCI: Setting latency timer of device 02:00.0 to 64
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip0: MII transceiver #1 config 1000 status 7849 advertising 01e1.
eth0: New link status: Disconnected (0002)
eth0: WPA, AES, TKIP, WEP128, WEP64 supported
eth0: U.S. Robotics Wireless USB Adapter at USB-0000:00:00.0-1:2-0BAF:0118 (MAC address 00:C0:49:53:54:FD) ready
divert: allocating divert_blk for eth1
eth1: Digital DS21143 Tulip rev 65 at 0xca94f000, 00:10:7A:61:01:0A, IRQ 9.
parport0: PC-style at 0x378 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378
ohci1394: pci_module_init failed
ip_tables: © 2000-2002 Netfilter core team
driverloader: NdisWrapStatusToErrno: unknown: NDIS_STATUS_BUFFER_OVERFLOW
eth0: Error -5 setting txpower (0)
eth0: New link status: Connected (0001)
mtrr: no more MTRRs available
Via 686a audio driver 1.9.1
PCI: Found IRQ 11 for device 00:07.5
ac97_codec: AC97 Audio codec, id: 0x4144:0x5340 (Analog Devices AD1881)
via82cxxx: board #1 at 0x1000, IRQ 11
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
ide-floppy driver 0.99.newide
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
ftape v3.04d 25/11/97
© 1993-1996 Bas Laarhoven (bas@vimec.nl)
© 1995-1996 Kai Harrekilde-Petersen (khp@dolphinics.no)
© 1996-1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)
QIC-117 driver for QIC-40/80/3010/3020 floppy tape drives
Compiled for Linux version 2.4.18-14 with versioned symbols
[000] ftape-init.c (ftape_init) - installing QIC-117 floppy tape hardware drive ... .
[001] ftape-init.c (ftape_init) - ftape_init @ 0xca99e060.
[002] ftape-buffer.c (add_one_buffer) - buffer nr #1 @ c8c46ee0, dma area @ c0848000.
[003] ftape-buffer.c (add_one_buffer) - buffer nr #2 @ c8c46ce0, dma area @ c0840000.
[004] ftape-buffer.c (add_one_buffer) - buffer nr #3 @ c8c46c60, dma area @ c0838000.
[005] ftape-calibr.c (time_inb) - inb() duration: 2211 nsec.
[006] ftape-calibr.c (ftape_calibrate) - TC for `ftape_udelay()' = 210 nsec (at 40959 counts).
[007] ftape-calibr.c (ftape_calibrate) - TC for `fdc_wait()' = 4767 nsec (at 1279 counts).
Go to the top of the page
 
+Quote Post

2 Pages V   1 2 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 23rd October 2017 - 05:43 PM