Linux Help
guides forums blogs
Home Desktops Distributions ISO Images Logos Newbies Reviews Software Support & Resources Linuxhelp Wiki

Welcome Guest ( Log In | Register )



Advanced DNS Management
New ZoneEdit. New Managment.

FREE DNS Is Back

Sign Up Now
 
Reply to this topicStart new topic
> Network Problem Eepro100, Unable to get my Network card working
danhole
post Sep 1 2005, 04:04 PM
Post #1


Whats this Lie-nix Thing?
*

Group: Members
Posts: 1
Joined: 1-September 05
Member No.: 5,473



I'm a bit new to this but cannot solve this problem.
I have a HP E-PC 40 and this has on board network card.
I am using Mandrake Linux 10.2
I have tested the network card from whitin win 98 and this works fine.
I have also pluged the Hard Disk into anouther machine and this boots fine and uses the network card fine.
The network is connected to a Netgear ADSL router
I have assigned the box in question the ip 192.168.200.10 and the router ip is 192.168.200.1
I have enclosed below lots of in can someone take a look
If you need any more info then please e-mail me on dan@eloh.co.uk
Thankyou. biggrin.gif

[root@mybox ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:04:23:28:2D:69
inet addr:192.168.200.10 Bcast:192.168.200.255 Mask:255.255.255.0
inet6 addr: fe80::204:23ff:fe28:2d69/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:51 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 cool.gif TX bytes:2937 (2.8 Kb)
Interrupt:5

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:109 errors:0 dropped:0 overruns:0 frame:0
TX packets:109 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8476 (8.2 Kb) TX bytes:8476 (8.2 Kb)

sit0 Link encap:IPv6-in-IPv4
inet6 addr: ::192.168.200.10/96 Scope:Compat
inet6 addr: ::127.0.0.1/96 Scope:Unknown
UP RUNNING NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 cool.gif TX bytes:0 (0.0 cool.gif


[root@mybox ~]# dmesg
Linux version 2.6.11-6mdk (gb@n2.mandrakesoft.com) (gcc version 3.4.3 (Mandrakelinux
10.2 3.4.3-3mdk)) #1 Tue Mar 22 16:04:32 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ee0000 (usable)
BIOS-e820: 0000000017ee0000 - 0000000017ef0000 (ACPI data)
BIOS-e820: 0000000017ef0000 - 0000000017f00000 (ACPI NVS)
BIOS-e820: 0000000017f00000 - 0000000018000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
382MB LOWMEM available.
found SMP MP-table at 000fbed0
On node 0 totalpages: 98016
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 93920 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000f9ec0
ACPI: RSDT (v001 HP-BDD HPBDD-IW 0x00000011 MSFT 0x0100000b) @ 0x17ee0000
ACPI: FADT (v001 HP-BDD HPBDD-IW 0x00000001 MSFT 0x0100000b) @ 0x17ee0030
ACPI: BOOT (v001 HP-BDD HP 0x00000011 MSFT 0x0100000b) @ 0x17ee0110
ACPI: MADT (v001 HP-BDD HPBDD-IW 0x00000001 MSFT 0x0100000b) @ 0x17ee00b0
ACPI: DSDT (v001 INTEL SOLANO 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:11 APIC version 17
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: SOLANO APIC at: 0xFEE00000
I/O APIC #2 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 18000000 (gap: 18000000:e6c00000)
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
Kernel command line: BOOT_IMAGE=linux ro root=301 acpi=ht resume=/dev/hda5
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1096.479 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 384256k/392064k available (2295k kernel code, 7304k reserved, 686k data, 264k
init, 0k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2170.88 BogoMIPS (lpj=1085440)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000
000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 000000
00 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 000
00000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel® Celeron™ CPU 1100MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=0
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 147k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 © Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1125607374.873:0): initialized
inotify device minor=63
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST320410A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
hdc: Disabling (U)DMA for SAMSUNG CD-ROM SN-124 (blacklisted)
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39851760 sectors (20404 MB) w/2048KiB Cache, CHS=39535/16/63, UDMA(100)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 264k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 10, io base 0xdd00
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1f.4: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: irq 11, io base 0xdd80
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
EXT3 FS on hda1, internal journal
Adding 1124508k swap on /dev/hda5. Priority:-1 extents:1
hw_random hardware driver 1.0.0 loaded
Linux agpgart interface v0.100 © Dave Jones
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
loop: loaded (max 8 devices)
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
8139too Fast Ethernet driver 0.9.27
ip_conntrack version 2.1 (3063 buckets, 24504 max) - 248 bytes per conntrack
ip_tables: © 2000-2002 Netfilter core team
floppy0: no floppy controllers found
floppy0: no floppy controllers found
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
agpgart: Detected an Intel i815 Chipset.
agpgart: Maximum main memory to use for agp memory: 320M
agpgart: AGP aperture is 64M @ 0xe8000000
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.
com.sg> and others
eth0: 0000:01:08.0, 00:04:23:28:2D:69, IRQ 5.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
NET: Registered protocol family 17
ip_tables: © 2000-2002 Netfilter core team
ip_conntrack version 2.1 (3063 buckets, 24504 max) - 248 bytes per conntrack
Intel 810 + AC97 Audio, version 1.01, 16:02:07 Mar 22 2005
PCI: Setting latency timer of device 0000:00:1f.5 to 64
i810: Intel ICH2 found at IO 0xdc80 and 0xde00, MEM 0x0000 and 0x0000, IRQ 5
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ADS96 (Analog Devices AD1885)
i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total
channels = 2
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03b26e0(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device d67a0800(sit0)
[drm] Initialized drm 1.0.0 20040925
[drm] Initialized i810 1.4.0 20030605 on minor 0:
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=73 TO
S=0x00 PREC=0x00 TTL=255 ID=0 DFPROTO=UDP SPT=5353 DPT=5353 LEN=53
[drm] Using v1.4 init.
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=73 TO
S=0x00 PREC=0x00 TTL=255 ID=1 DFPROTO=UDP SPT=5353 DPT=5353 LEN=53
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=73 TO
S=0x00 PREC=0x00 TTL=255 ID=2 DFPROTO=UDP SPT=5353 DPT=5353 LEN=53
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=108 T
OS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=108 T
OS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
Installing knfsd (copyright © 1996 okir@monad.swb.de).
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=108 T
OS=0x00 PREC=0x00 TTL=255 ID=5 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=108 T
OS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
eth0: no IPv6 routers present
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=108 T
OS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=108 T
OS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out: status e050 0c00 at 0/60 command 0001a000.
eth0: freeing mc frame.
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=73 TO
S=0x00 PREC=0x00 TTL=255 ID=0 DFPROTO=UDP SPT=5353 DPT=5353 LEN=53
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=92 TO
S=0x00 PREC=0x00 TTL=255 ID=1 DFPROTO=UDP SPT=5353 DPT=5353 LEN=72
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=73 TO
S=0x00 PREC=0x00 TTL=255 ID=2 DFPROTO=UDP SPT=5353 DPT=5353 LEN=53
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=73 TO
S=0x00 PREC=0x00 TTL=255 ID=3 DFPROTO=UDP SPT=5353 DPT=5353 LEN=53
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=67 TO
S=0x00 PREC=0x00 TTL=255 ID=4 DFPROTO=UDP SPT=5353 DPT=5353 LEN=47
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=92 TO
S=0x00 PREC=0x00 TTL=255 ID=5 DFPROTO=UDP SPT=5353 DPT=5353 LEN=72
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=67 TO
S=0x00 PREC=0x00 TTL=255 ID=6 DFPROTO=UDP SPT=5353 DPT=5353 LEN=47
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=108 T
OS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=108 T
OS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=108 T
OS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=108 T
OS=0x00 PREC=0x00 TTL=255 ID=10 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=108 T
OS=0x00 PREC=0x00 TTL=255 ID=11 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.200.10 DST=224.0.0.251 LEN=108 T
OS=0x00 PREC=0x00 TTL=255 ID=12 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out: status e050 0c00 at 60/120 command 0001a000.
eth0: freeing mc frame.
[root@mybox ~]#

[root@mybox ~]# lsmod
Module Size Used by
e100 30624 0
nfsd 210272 9
exportfs 4672 1 nfsd
lockd 59144 2 nfsd
sunrpc 122788 12 nfsd,lockd
i810 20544 1
drm 58388 2 i810
md5 3648 1
ipv6 232320 18
rfcomm 33692 0
l2cap 20644 5 rfcomm
bluetooth 41380 4 rfcomm,l2cap
i810_audio 34324 1
ac97_codec 17804 1 i810_audio
soundcore 7104 2 i810_audio
ipt_TOS 1888 12
ipt_REJECT 5600 4
ipt_pkttype 1248 4
ipt_LOG 6208 8
ipt_state 1376 10
ipt_multiport 2144 0
ipt_conntrack 1984 0
iptable_mangle 2080 1
ip_nat_irc 1568 0
ip_nat_tftp 1280 0
ip_nat_ftp 2272 0
iptable_nat 19068 3 ip_nat_irc,ip_nat_tftp,ip_nat_ftp
ip_conntrack_irc 70384 1 ip_nat_irc
ip_conntrack_tftp 3056 1 ip_nat_tftp
ip_conntrack_ftp 71344 1 ip_nat_ftp
ip_conntrack 37400 9 ipt_state,ipt_conntrack,ip_nat_irc,ip_nat_tftp,ip_nat
_ftp,iptable_nat,ip_conntrack_irc,ip_conntrack_tftp,ip_conntrack_ftp
iptable_filter 2144 1
ip_tables 18176 10 ipt_TOS,ipt_REJECT,ipt_pkttype,ipt_LOG,ipt_state,ipt
_multiport,ipt_conntrack,iptable_mangle,iptable_nat,iptable_filter
af_packet 16232 2
eepro100 27056 0
intel-agp 20028 1
usbhid 43712 0
8139too 21408 0
mii 4224 3 e100,eepro100,8139too
ide-cd 36772 0
loop 13544 0
via-agp 7424 0
agpgart 28264 4 drm,intel-agp,via-agp
hw_random 4340 0
uhci-hcd 28944 0
usbcore 106008 3 usbhid,uhci-hcd
ext3 123304 2
jbd 48344 1 ext3

[root@mybox ~]# lspci
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Contr
oller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82815 CGC [Chipset Graphics Cont
roller] (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 05)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 05)
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 05)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 05)
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 05)
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 05)
00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio (rev 0
5)
01:08.0 Ethernet controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller
(rev 03)
[root@mybox ~]#

[root@mybox ~]#
Go to the top of the page
 
+Quote Post
DS2K3
post Sep 2 2005, 06:50 AM
Post #2


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,284
Joined: 14-November 04
From: Southampton, Hampshire
Member No.: 4,165



The network card is detected and enabled:

QUOTE
eth0 Link encap:Ethernet HWaddr 00:04:23:28:2D:69
inet addr:192.168.200.10 Bcast:192.168.200.255 Mask:255.255.255.0
inet6 addr: fe80::204:23ff:fe28:2d69/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:51 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 cool.gif TX bytes:2937 (2.8 Kb)
Interrupt:5


What is it that you cant do?

D


--------------------
Fixed your problem? Let us know!
richard@linuxhelp.net

www.Gathr.co.uk Online Event Management
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 21st October 2017 - 06:16 PM