Linux Help
guides forums blogs
Home Desktops Distributions ISO Images Logos Newbies Reviews Software Support & Resources Linuxhelp Wiki

Welcome Guest ( Log In | Register )



Advanced DNS Management
New ZoneEdit. New Managment.

FREE DNS Is Back

Sign Up Now
> Hardware Support, Please Read First!!
Corey
post Feb 17 2005, 05:15 PM
Post #1


Its GNU/Linuxhelp.net
*******

Group: Admin
Posts: 1,254
Joined: 21-September 02
From: St John's, Newfoundland, Canada
Member No.: 3



In order to get accurate, and useful replies to your question, you need to provide as much information about your problem as possible.

Instructions for...

All Devices
Please provide the output of "dmesg" (at least the lines relating to the hardware in question) and the output of "lsmod".

USB Devices
1 - Disconnect the device, and reboot your system (or turn it on)
2 - Open a terminal, and type "su -" (no quotes) to gain temporary root privileges
3 - Run the following command "tail -f /var/log/messages" (again, no quotes)
4 - Plug the USB device into your computer
5 - Provide any output on the terminal as part of your post
5 - Run "lsmod" and "lsusb" and provide the output in your post

PCI Devices
Please provide the output of "lspci"

In General
Obviously, you should also provide information such as the distribution you are using, the kernel version (if you know it) and any relevant product codes
for the hardware. eg, "The onboard audion on my motherboard isnt working" is not very helpful, but "the onboard audio on my Chaintech 7KJD isnt working"
is much more useful.

It is far better to provide us with too much information, than too little

Revised 22/05/2006 by DS2K3


--------------------
Corey Quilliam
(former) Linuxhelp.ca Administrator
cquilliam-AT-gmail-dot-com

Want to help out Linuxhelp.net? Check out our Linuxhelp Wiki and see if there are some articles you would like to submit!!

--
Ubuntu 8.04 64-bit - Work Laptop (HP-Compaq NC6400 Core2)
Kubuntu 8.04 64-bit - Desktop (HP m8120n QuadCore)
Ubuntu 6.04 - Server (I'm not upgrading this baby until support runs out in 2012) (Some old POS dell)
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
fullur
post May 26 2006, 12:58 AM
Post #2


./configure
***

Group: Members
Posts: 50
Joined: 24-September 05
Member No.: 5,549



How do I find the output of my boot log? I saw some sort of error relating to captive-ntfs while it was starting up, but it dissappeared before I could read the whole thing.


--------------------
Fedora Core 5
AMD Athlon XP 2400+
768 MB PC266 RAM
Go to the top of the page
 
+Quote Post

Posts in this topic
- Corey   Hardware Support   Feb 17 2005, 05:15 PM
- - fullur   How do I find the output of my boot log? I saw som...   May 26 2006, 12:58 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 13th December 2017 - 03:52 PM