Linux Help
guides forums blogs
Home Desktops Distributions ISO Images Logos Newbies Reviews Software Support & Resources Linuxhelp Wiki

Welcome Guest ( Log In | Register )



Advanced DNS Management
New ZoneEdit. New Managment.

FREE DNS Is Back

Sign Up Now
 
Reply to this topicStart new topic
> Problems After Installing Mailscanner Per Guide, Mail stays in the queue as deferred.
cpufixrman
post Jul 18 2004, 07:27 AM
Post #1


Whats this Lie-nix Thing?
*

Group: Members
Posts: 5
Joined: 18-July 04
Member No.: 3,368



Hello,

I want to start of with saying that I really appreciate the hard work that was put into creating this guide. I have found it very useful, and easy to follow, being fairly new to postfix. I am running a WBEL 3.0 system, for mail and web services, and until now, everything has been great.

Now, my problem.

I used the Installing Postfix... guide to install Postfix, with SpamAssassin and SquirrelMail. That ran great for the last 3 monts, and would have continued had I not tried to "improve" upon my setup.

Following the guide, I decided I wanted to add virus checking to all mesages. I installed ClamAV and MailScanner as per the instructions, and everything went without error mesages. I did run into one problem after starting MailScanner though. When mail was attempted to be delivered to a local mailbox, I would get an error that I needed to set the following option in my /etc/postfix/main.cf:

alternate_config_directories = /etc/postfix.in

After doing this, mail is now being routed as far as the mail queue. At this point it just sits there with a status of Deferred, and never is delivered to the local mail box until I run the command 'postfix flush' after which it will be delivered.

Everything outbound seems to be ok, and there are no errors in any of the logs, just the following is what I see in the /var/log/maillog file:

Jul 18 05:09:40 etek1 postfix/smtpd[13545]: connect from 61-229-165-141.dynamic.hinet.net[61.229.165.141]
Jul 18 05:09:44 etek1 postfix/smtpd[13545]: D8A58132E69: client=61-229-165-141.dynamic.hinet.net[61.229.165.141]
Jul 18 05:09:50 etek1 postfix/cleanup[13547]: D8A58132E69: message-id=<GZBRFGATQUSSBYJDANTNRTF@net-quest.com>
Jul 18 05:09:50 etek1 postfix/nqmgr[13293]: D8A58132E69: from=<migahfwnvehem@mail2000.com.tw>, size=2511, nrcpt=1 (queue active)
Jul 18 05:09:51 etek1 spamd[2062]: connection from etek1.inhomepc.net [127.0.0.1] at port 32775
Jul 18 05:09:51 etek1 spamd[13551]: info: setuid to nobody succeeded
Jul 18 05:09:51 etek1 spamd[13551]: Creating default_prefs [//.spamassassin/user_prefs]
Jul 18 05:09:51 etek1 spamd[13551]: Cannot write to //.spamassassin/user_prefs: No such file or directory
Jul 18 05:09:51 etek1 spamd[13551]: Couldn't create readable default_prefs for [//.spamassassin/user_prefs]
Jul 18 05:09:51 etek1 spamd[13551]: processing message <GZBRFGATQUSSBYJDANTNRTF@net-quest.com> for nobody:99.
Jul 18 05:09:53 etek1 postfix/smtpd[13545]: disconnect from 61-229-165-141.dynamic.hinet.net[61.229.165.141]
Jul 18 05:10:21 etek1 spamd[13551]: identified spam (9.2/4.5) for nobody:99 in 30.6 seconds, 2447 bytes.
Jul 18 05:10:21 etek1 postfix/pickup[13292]: 87979132E6B: uid=99 from=<migahfwnvehem@mail2000.com.tw>
Jul 18 05:10:21 etek1 postfix/cleanup[13547]: 87979132E6B: message-id=<GZBRFGATQUSSBYJDANTNRTF@net-quest.com>
Jul 18 05:10:21 etek1 postfix/pipe[13549]: D8A58132E69: to=<cpu-ernie@inhomepc.net>, relay=spamassassin, delay=37, status=sent (etek1.inhomepc.net)
Jul 18 05:10:21 etek1 postfix/nqmgr[13293]: 87979132E6B: from=<migahfwnvehem@mail2000.com.tw>, size=4704, nrcpt=1 (queue active)
Jul 18 05:10:21 etek1 postfix/nqmgr[13293]: 87979132E6B: to=<cpu-ernie@inhomepc.net>, relay=none, delay=0, status=deferred (deferred transport)

Gladly, I see that this was in fact caught as spam/virus infected. However, I would have expected it to go somewhere and not sit in the queue. When I run 'mailq' I see something like this:

[root@etek1 root]# mailq
-Queue ID- --Size-- ----Arrival Time---- -Sender/Recipient-------
8A0725007E 740 Sun Jul 18 05:10:34 postmaster@inhomepc.net
(deferred transport)
postmaster@inhomepc.net

970195007D 5237 Sun Jul 18 05:10:21 migahfwnvehem@mail2000.com.tw
(deferred transport)
cpu-ernie@inhomepc.net



At this point, I can run the 'postfix flush' command and it will be pushed to my mail box, but I know I shouldn't have to.

Am I missing a critical step here? I have enclosed my /etx/postfix/main.cf, /etc/postfix.in/main.cf, and /etc/MailScanner/MailScanner.conf files for review in the hopes that someone can spot an error, or make a recommendation.

Thank you in advance for your assistance.



***** MailScanner.conf *****

# Main configuration file for the MailScanner E-Mail Virus Scanner
#
# It's good practice to check through configuration files to make sure
# they fit with your system and your needs, whatever you expect them to
# contain.
#
# Note: If your directories are symlinked (soft-linked) in any way,
# please put their *real* location in here, not a path that
# includes any links. You may get some very strange error
# messages from some of the virus scanners if you don't.
#
# Note for Version 4.00 and above:
# A lot of the settings can take a ruleset as well as just simple
# values. These rulesets are files containing rules which are applied
# to the current message to calculate the value of the configuration
# option. The rules are checked in the order they appear in the ruleset.
#
# Note for Version 4.03 and above:
# As well as rulesets, you can now include your own functions in
# here. Look at the directory containing Config.pm and you will find
# CustomConfig.pm. In here, you can add your own "value" function and
# an Initvalue function to set up any global state you need such as
# database connections. Then for a setting below, you can put:
# Configuration Option = &ValueFunction
# where "ValueFunction" is the name of the function you have
# written in CustomConfig.pm.
#

#
# Definition of variables which are substituted into definitions below
#

# Set the directory containing all the reports in the required language
%report-dir% = /etc/MailScanner/reports/en

# Configuration directory containing this file
%etc-dir% = /etc/MailScanner

# Rulesets directory containing your ".rules" files
%rules-dir% = /etc/MailScanner/rules

# Enter a short identifying name for your organisation below, this is
# used to make the X-MailScanner headers unique for your organisation.
# Multiple servers within one site should use an identical value here
# to avoid adding multiple redundant headers where mail has passed
# through several servers within your organisation.
# RULE: It must not contain any spaces!
# Note: Some Symantec scanners complain (incorrectly) about "."
# ***** characters appearing in the names of headers.
%org-name% = webmail.inhomepc.net

#
# System settings
# ---------------
#

# How many MailScanner processes do you want to run at a time?
# There is no point increasing this figure if your MailScanner server
# is happily keeping up with your mail traffic.
# If you are running on a server with more than 1 CPU, or you have a
# high mail load (and/or slow DNS lookups) then you should see better
# performance if you increase this figure.
# If you are running on a small system with limited RAM, you should
# note that each child takes just over 20MB.
#
# As a rough guide, try 5 children per CPU. But read the notes above.
Max Children = 5

# User to run as (not normally used for sendmail)
# If you want to change the ownership or permissions of the quarantine or
# temporary files created by MailScanner, please see the "Incoming Work"
# settings later in this file.
#Run As User = mail
Run As User = postfix
#Run As User =

# Group to run as (not normally used for sendmail)
#Run As Group = mail
#Run As Group = postfix
Run As Group =

# How often (in seconds) should each process check the incoming mail
# queue for new messages? If you have a quiet mail server, you might
# want to increase this value so it causes less load on your server, at
# the cost of slightly increasing the time taken for an average message
# to be processed.
Queue Scan Interval = 5

# Set location of incoming mail queue
#
# This can be any one of
# 1. A directory name
# Example: /var/spool/mqueue.in
# 2. A wildcard giving directory names
# Example: /var/spool/mqueue.in/*
# 3. The name of a file containing a list of directory names,
# which can in turn contain wildcards.
# Example: /etc/MailScanner/mqueue.in.list.conf
#
Incoming Queue Dir = /var/spool/postfix.in/deferred

# Set location of outgoing mail queue.
# This can also be the filename of a ruleset.
Outgoing Queue Dir = /var/spool/postfix/incoming

# Set where to unpack incoming messages before scanning them
# This can completely safely use tmpfs or a ramdisk, which will
# give you a significant performance improvement.
# NOTE: The path given here must not include any links at all,
# NOTE: but must be the absolute path to the directory.
Incoming Work Dir = /var/spool/MailScanner/incoming

# Set where to store infected and message attachments (if they are kept)
# This can also be the filename of a ruleset.
Quarantine Dir = /var/spool/MailScanner/quarantine

# Set where to store the process id number so you can stop MailScanner
PID file = /var/run/MailScanner.pid

# To avoid resource leaks, re-start periodically
Restart Every = 14400

# Set whether to use postfix, sendmail, exim or zmailer.
# If you are using postfix, then see the "SpamAssassin User State Dir"
# setting near the end of this file
MTA = postfix

# Set how to invoke MTA when sending messages MailScanner has created
# (e.g. to sender/recipient saying "found a virus in your message")
# This can also be the filename of a ruleset.
Sendmail = /usr/sbin/sendmail

# Sendmail2 is provided for Exim users.
# It is the command used to attempt delivery of outgoing cleaned/disinfected
# messages.
# This is not usually required for sendmail.
# This can also be the filename of a ruleset.
#For Exim users: Sendmail2 = /usr/sbin/exim -C /etc/exim/exim_send.conf
#For sendmail users: Sendmail2 = /usr/sbin/sendmail
#Sendmail2 = /usr/sbin/sendmail -C /etc/exim/exim_send.conf
Sendmail2 = /usr/sbin/sendmail

#
# Incoming Work Dir Settings
# --------------------------
#
# You should not normally need to touch these settings at all,
# unless you are using ClamAV and need to be able to use the
# external archive unpackers instead of ClamAV's built-in ones.

# If you want to create the temporary working files so they are owned
# by a user other than the "Run As User" setting at the top of this file,
# you can change that here.
# Note: If the "Run As User" is not "root" then you cannot change the
# user but may still be able to change the group, if the
# "Run As User" is a member of both of the groups "Run As Group"
# and "Incoming Work Group".
Incoming Work User =
Incoming Work Group =

# If you want processes running under the same *group* as MailScanner to
# be able to read the working files (and list what is in the
# directories, of course), set to 0640. If you want *all* other users to
# be able to read them, set to 0644. For a detailed description, if
# you're not already familiar with it, refer to `man 2 chmod`.
# Typical use: external helper programs of virus scanners (notably ClamAV),
# like unpackers.
# Use with care, you may well open security holes.
Incoming Work Permissions = 0600

#
# Quarantine and Archive Settings
# -------------------------------
#
# If, for example, you are using a web interface so that users can manage
# their quarantined files, you might want to change the ownership and
# permissions of the quarantined so that they can be read and/or deleted
# by the web server.
# Don't touch this unless you know what you are doing!

# If you want to create the quarantine/archive so the files are owned
# by a user other than the "Run As User" setting at the top of this file,
# you can change that here.
# Note: If the "Run As User" is not "root" then you cannot change the
# user but may still be able to change the group, if the
# "Run As User" is a member of both of the groups "Run As Group"
# and "Quarantine Group".
Quarantine User =
Quarantine Group =

# If you want processes running under the same *group* as MailScanner to
# be able to read the quarantined files (and list what is in the
# directories, of course), set to 0640. If you want *all* other users to
# be able to read them, set to 0644. For a detailed description, if
# you're not already familiar with it, refer to `man 2 chmod`.
# Typical use: let the webserver have access to the files so users can
# download them if they really want to.
# Use with care, you may well open security holes.
Quarantine Permissions = 0600

#
# Processing Incoming Mail
# ------------------------
#

# In every batch of virus-scanning, limit the maximum
# a) number of unscanned messages to deliver
# b) number of potentially infected messages to unpack and scan
# c) total size of unscanned messages to deliver
# d) total size of potentially infected messages to unpack and scan

Max Unscanned Bytes Per Scan = 100000000
Max Unsafe Bytes Per Scan = 50000000
Max Unscanned Messages Per Scan = 30
Max Unsafe Messages Per Scan = 30

# If more messages are found in the queue than this, then switch to an
# "accelerated" mode of processing messages. This will cause it to stop
# scanning messages in strict date order, but in the order it finds them
# in the queue. If your queue is bigger than this size a lot of the time,
# then some messages could be greatly delayed. So treat this option as
# "in emergency only".
Max Normal Queue Size = 800

# The maximum number of attachments allowed in a message before it is
# considered to be an error. Some email systems, if bouncing a message
# between 2 addresses repeatedly, add information about each bounce as
# an attachment, creating a message with thousands of attachments in just
# a few minutes. This can slow down or even stop MailScanner as it uses
# all available memory to unpack these thousands of attachments.
# This can also be the filename of a ruleset.
Maximum Attachments Per Message = 200

# Expand TNEF attachments using an external program (or a Perl module)?
# This should be "yes" unless the scanner you are using (Sophos, McAfee) has
# the facility built-in. However, if you set it to "no", then the filenames
# within the TNEF attachment will not be checked against the filename rules.
Expand TNEF = yes

# Some versions of Microsoft Outlook generate unparsable Rich Text
# format attachments. Do we want to deliver these bad attachments anyway?
# Setting this to yes introduces the slight risk of a virus getting through,
# but if you have a lot of troubled Outlook users you might need to do this.
# We are working on a replacement for the TNEF decoder.
# This can also be the filename of a ruleset.
Deliver Unparsable TNEF = no

# Where the MS-TNEF expander is installed.
# This is EITHER the full command (including maxsize option) that runs
# the external TNEF expander binary,
# OR the keyword "internal" which will make MailScanner use the Perl
# module that does the same job.
# They are both provided as I am unsure which one is faster and which
# one is capable of expanding more file formats (there are plenty!).
#
# The --maxsize option limits the maximum size that any expanded attachment
# may be. It helps protect against Denial Of Service attacks in TNEF files.
#TNEF Expander = internal
# This can also be the filename of a ruleset.
TNEF Expander = /usr/bin/tnef --maxsize=100000000

# The maximum length of time the TNEF Expander is allowed to run for 1 message.
# (in seconds)
TNEF Timeout = 120

# Where the "file" command is installed.
# This is used for checking the content type of files, regardless of their
# filename.
# To disable Filetype checking, set this value to blank.
File Command = #/usr/bin/file

# The maximum length of time the "file" command is allowed to run for 1
# batch of messages (in seconds)
File Timeout = 120

# The maximum size, in bytes, of any message including the headers.
# If this is set to zero, then no size checking is done.
# This can also be the filename of a ruleset, so you can have different
# settings for different users. You might want to set this quite small for
# dialup users so their email applications don't time out downloading huge
# messages.
Maximum Message Size = 0

# The maximum size, in bytes, of any attachment in a message.
# If this is set to zero, effectively no attachments are allowed.
# If this is set less than zero, then no size checking is done.
# This can also be the filename of a ruleset, so you can have different
# settings for different users. You might want to set this quite small for
# large mailing lists so they don't get deluged by large attachments.
Maximum Attachment Size = -1

# The maximum depth to which zip archives will be unpacked, to allow for
# checking filenames and filetypes within zip archives.
# To disable this feature set this to 0.
# A common useful setting is this option = 0, and Allow Password-Protected
# Archives = no. That block password-protected archives but does not do
# any filename/filetype checks on the files within the archive.
Maximum Archive Depth = 20

# Find zip archives by filename or by file contents?
# Finding them by content is a far more reliable way of finding them, but
# it does mean that you cannot tell your users to avoid zip file checking
# by renaming the file from ".zip" to "_zip" and tricks like that.
# Only set this to no (i.e. check by filename only) if you don't want to
# reliably check the contents of zip files. Note this does not affect
# virus checking, but it will affect all the other checks done on the contents
# of the zip file.
# This can also be the filename of a ruleset.
Find Archives By Content = yes

#
# Virus Scanning and Vulnerability Testing
# ----------------------------------------
#

# Do you want to scan email for viruses?
# A few people don't have a virus scanner licence and so want to disable
# all the virus scanning.
# NOTE: This switch actually switches on/off all processing of the email
# messages. If you just want to switch off actual virus scanning,
# then set "Virus Scanners = none" instead.
#
# If you want to be able to switch scanning on/off for different users or
# different domains, set this to the filename of a ruleset.
# This can also be the filename of a ruleset.
Virus Scanning = yes

# Which Virus Scanning package to use:
# sophos from www.sophos.com, or
# sophossavi (also from www.sophos.com, using the SAVI perl module), or
# mcafee from www.mcafee.com, or
# command from www.command.co.uk, or
# bitdefender from www.bitdefender.com, or
# drweb from www.dials.ru/english/dsav_toolkit/drwebunix.htm, or
# kaspersky-4.5 from www.kaspersky.com, or
# kaspersky from www.kaspersky.com, or
# kavdaemonclient from www.kaspersky.com, or
# etrust from http://www3.ca.com/Solutions/Product.asp?ID=156, or
# inoculate from www.cai.com/products/inoculateit.htm, or
# inoculan from ftp.ca.com/pub/getbbs/linux.eng/inoctar.LINUX.Z, or
# nod32 for No32 before version 1.99 from www.nod32.com, or
# nod32-1.99 for Nod32 1.99 and later, from www.nod32.com, or
# f-secure from www.f-secure.com, or
# f-prot from www.f-prot.com, or
# panda from www.pandasoftware.com, or
# rav from www.ravantivirus.com, or
# antivir from www.antivir.de, or
# clamav from www.clamav.net, or
# clamavmodule (also from www.clamav.net using the ClamAV perl module), or
# trend from www.trendmicro.com, or
# norman from www.norman.de, or
# css from www.symantec.com, or
# avg from www.grisoft.com, or
# vexira from www.centralcommand.com, or
# none (no virus scanning at all)
#
# Note for McAfee users: do not use any symlinks with McAfee at all. It is
# very strange but may not detect all viruses when
# started from a symlink or scanning a directory path
# including symlinks.
#
# Note: If you want to use multiple virus scanners, then this should be a
# space-separated list of virus scanners. For example:
# Virus Scanners = sophos f-prot mcafee
#
# Note: Make sure that you check that the base installation directory in the
# 3rd column of virus.scanners.conf matches the location you have
# installed each of your virus scanners. The supplied
# virus.scanners.conf file assumes the default installation locations
# recommended by each of the virus scanner installation guides.
#
Virus Scanners = clamavmodule

# The maximum length of time the commercial virus scanner is allowed to run
# for 1 batch of messages (in seconds).
Virus Scanner Timeout = 300

# Should I attempt to disinfect infected attachments and then deliver
# the clean ones. "Disinfection" involves removing viruses from files
# (such as removing macro viruses from documents). "Cleaning" is the
# replacement of infected attachments with "VirusWarning.txt" text
# attachments.
# Less than 1% of viruses in the wild can be successfully disinfected,
# as macro viruses are now a rare occurrence. So the default has been
# changed to "no" as it gives a significant performance improvement.
#
# This can also be the filename of a ruleset.
Deliver Disinfected Files = no

# Strings listed here will be searched for in the output of the virus scanners.
# It is used to list which viruses should be handled differently from other
# viruses. If a virus name is given here, then
# 1) The sender will not be warned that he sent it
# 2) No attempt at true disinfection will take place
# (but it will still be "cleaned" by removing the nasty attachments
# from the message)
# 3) The recipient will not receive the message,
# unless the "Still Deliver Silent Viruses" option is set
# Other words that can be put in this list are the 5 special keywords
# HTML-IFrame : inserting this will stop senders being warned about
# HTML Iframe tags, when they are not allowed.
# HTML-Codebase : inserting this will stop senders being warned about
# HTML Object Codebase/Data tags, when they are not allowed.
# HTML-Script : inserting this will stop senders being warned about
# HTML Script tags, when they are not allowed.
# HTML-Form : inserting this will stop senders being warned about
# HTML Form tags, when they are not allowed.
# Zip-Password : inserting this will stop senders being warned about
# password-protected zip files, when they are not allowed.
# This keyword is not needed if you include All-Viruses.
# All-Viruses : inserting this will stop senders being warned about
# any virus, while still allowing you to warn senders
# about HTML-based attacks. This includes Zip-Password
# so you don't need to include both.
#
# The default of "All-Viruses" means that no senders of viruses will be
# notified (as the sender address is always forged these days anyway),
# but anyone who sends a message that is blocked for other reasons will
# still be notified.
#
# This can also be the filename of a ruleset.
Silent Viruses = HTML-IFrame All-Viruses

# Still deliver (after cleaning) messages that contained viruses listed
# in the above option ("Silent Viruses") to the recipient?
# Setting this to "yes" is good when you are testing everything, and
# because it shows management that MailScanner is protecting them,
# but it is bad because they have to filter/delete all the incoming virus
# warnings.
#
# Note: Once you have deployed this into "production" use, you should set
# Note: this option to "no" so you don't bombard thousands of people with
# Note: useless messages they don't want!
#
# This can also be the filename of a ruleset.
Still Deliver Silent Viruses = yes

# Strings listed here will be searched for in the output of the virus scanners.
# It works to achieve the opposite effect of the "Silent Viruses" listed above.
# If a string here is found in the output of the virus scanners, then the
# message will be treated as if it were not infected with a "Silent Virus".
# If a message is detected as both a silent virus and a non-forging virus,
# then the ___non-forging status will override the silent status.___
# In simple terms, you should list virus names (or parts of them) that you
# know do *not* forge the From address.
# A good example of this is a document macro virus or a Joke program.
# Another word that can be put in this list is the special keyword
# Zip-Password : inserting this will cause senders to be warned about
# password-protected zip files, when they are not allowed.
# This will over-ride the All-Viruses setting in the list
# of "Silent Viruses" above.
#
Non-Forging Viruses = Joke/ OF97/ WM97/ W97M/

# Should encrypted messages be blocked?
# This is useful if you are wary about your users sending encrypted
# messages to your competition.
# This can be a ruleset so you can block encrypted message to certain domains.
Block Encrypted Messages = no

# Should unencrypted messages be blocked?
# This could be used to ensure all your users send messages outside your
# company encrypted to avoid snooping of mail to your business partners.
# This can be a ruleset so you can just check mail to certain users/domains.
Block Unencrypted Messages = no

# Should archives which contain any password-protected files be allowed?
# Leaving this set to "no" is a good way of protecting against all the
# protected zip files used by viruses at the moment.
# This can also be the filename of a ruleset.
Allow Password-Protected Archives = no

#
# Options specific to Sophos Anti-Virus
# -------------------------------------
#

# Anything on the next line that appears in brackets at the end of a line
# of output from Sophos will cause the error/infection to be ignored.
# Use of this option is dangerous, and should only be used if you are having
# trouble with lots of corrupt PDF files, for example.
# If you need to specify more than 1 string to find in the error message,
# then put each string in quotes and separate them with a comma.
# For example:
#Allowed Sophos Error Messages = "corrupt", "format not supported"
Allowed Sophos Error Messages =

# The directory (or a link to it) containing all the Sophos *.ide files.
# This is only used by the "sophossavi" virus scanner, and is irrelevant
# for all other scanners.
Sophos IDE Dir = /usr/local/Sophos/ide

# The directory (or a link to it) containing all the Sophos *.so libraries.
# This is only used by the "sophossavi" virus scanner, and is irrelevant
# for all other scanners.
Sophos Lib Dir = /usr/local/Sophos/lib

# SophosSAVI only: monitor each of these files for changes in size to
# detect when a Sophos update has happened. The date of the Sophos Lib Dir
# is also monitored.
# This is only used by the "sophossavi" virus scanner, not the "sophos"
# scanner setting.
Monitors For Sophos Updates = /usr/local/Sophos/ide/*ides.zip

#
# Options specific to ClamAV Anti-Virus
# -------------------------------------
#

# ClamAVModule only: monitor each of these files for changes in size to
# detect when a ClamAV update has happened.
# This is only used by the "clamavmodule" virus scanner, not the "clamav"
# scanner setting.
Monitors for ClamAV Updates = /var/lib/clamav/*.cvd

#
# Removing/Logging dangerous or potentially offensive content
# -----------------------------------------------------------
#

# Do you want to scan the messages for potentially dangerous content?
# Setting this to "no" will disable all the content-based checks except
# Virus Scanning, Allow Partial Messages and Allow External Message Bodies.
# This can also be the filename of a ruleset.
Dangerous Content Scanning = yes

# Do you want to allow partial messages, which only contain a fraction of
# the attachments, not the whole thing? There is absolutely no way to
# scan these "partial messages" properly for viruses, as MailScanner never
# sees all of the attachment at the same time. Enabling this option can
# allow viruses through. You have been warned.
# This can also be the filename of a ruleset so you can, for example, allow
# them in outgoing mail but not in incoming mail.
Allow Partial Messages = no

# Do you want to allow messages whose body is stored somewhere else on the
# internet, which is downloaded separately by the user's email package?
# There is no way to guarantee that the file fetched by the user's email
# package is free from viruses, as MailScanner never sees it.
# This feature is dangerous as it can allow viruses to be fetched from
# other Internet sites by a user's email package. The user would just
# think it was a normal email attachment and would have been scanned by
# MailScanner.
# It is only currently supported by Netscape 6 anyway, and the only people
# who it are the IETF. So I would strongly advise leaving this switched off.
# This can also be the filename of a ruleset.
Allow External Message Bodies = no

# Do you want to allow <IFrame> tags in email messages? This is not a good
# idea as it allows various Microsoft Outlook security vulnerabilities to
# remain unprotected, but if you have a load of mailing lists sending them,
# then you will want to allow them to keep your users happy.
# Value: yes => Allow these tags to be in the message
# no => Ban messages containing these tags
# disarm => Allow these tags, but stop these tags from working
# This can also be the filename of a ruleset, so you can allow them from
# known mailing lists but ban them from everywhere else.
Allow IFrame Tags = no

# Banning <IFrame> tags completely is likely to break some common HTML
# mailing lists, such as Dilbert and other important things like that.
# So before you implement any restriction on them, you can log the sender
# of any message containing an <IFrame>, so that you can set the option
# above to be a ruleset allowing IFrame tags from named "From" addresses
# and banning all others.
# This can also be the filename of a ruleset.
Log IFrame Tags = no

# Do you want to allow <Form> tags in email messages? This is a bad idea
# as these are used as scams to pursuade people to part with credit card
# information and other personal data.
# Value: yes => Allow these tags to be in the message
# no => Ban messages containing these tags
# disarm => Allow these tags, but stop these tags from working
# Note: Disarming can be defeated, it is not 100% safe!
# This can also be the filename of a ruleset.
Allow Form Tags = yes

# Do you want to allow <script> tags in email messages? This is a bad idea
# as these are used to exploit vulnerabilities in email applications and
# web browsers.
# Value: yes => Allow these tags to be in the message
# no => Ban messages containing these tags
# disarm => Allow these tags, but stop these tags from working
# Note: Disarming can be defeated, it is not 100% safe!
# This can also be the filename of a ruleset.
Allow Script Tags = no

# Do you want to allow <Img> tags with very small images in email messages?
# This is a bad idea as these are used as 'web bugs' to find out if a message
# has been read. It is not dangerous, it is just used to make you give away
# information.
# Value: yes => Allow these tags to be in the message
# disarm => Allow these tags, but stop these tags from working
# Note: Disarming can be defeated, it is not 100% safe!
# Note: You cannot block messages containing web bugs as their detection
# is very vulnerable to false alarms.
# This can also be the filename of a ruleset.
Allow WebBugs = disarm

# Do you want to allow <Object Codebase=...> or <Object Data=...> tags
# in email messages?
# This is a bad idea as it leaves you unprotected against various
# Microsoft-specific security vulnerabilities. But if your users demand
# it, you can do it.
# Value: yes => Allow these tags to be in the message
# no => Ban messages containing these tags
# disarm => Allow these tags, but stop these tags from working
# This can also be the filename of a ruleset, so you can allow them just
# for specific users or domains.
Allow Object Codebase Tags = no

# This option interacts with the "Allow ... Tags" options above like this:
#
# Allow...Tags Convert Danger... Action Taken on HTML Message
# ============ ================= ============================
# no no Blocked
# no yes Blocked
# disarm no Specified HTML tags disarmed
# disarm yes Specified HTML tags disarmed
# yes no Nothing, allowed to pass
# yes yes All HTML tags stripped
#
# If an "Allow ... Tags = yes" is triggered by a message, and this
# "Convert Dangerous HTML To Text" is set to "yes", then the HTML
# message will be converted to plain text. This makes the HTML
# harmless, while still allowing your users to see the text content
# of the messages. Note that all graphical content will be removed.
#
# This can also be the filename of a ruleset, so you can make this apply
# only to specific users or domains.
Convert Dangerous HTML To Text = no

# Do you want to convert all HTML messages into plain text?
# This is very useful for users who are children or are easily offended
# by nasty things like pornographic spam.
# This can also be the filename of a ruleset, so you can switch this
# feature on and off for particular users or domains.
Convert HTML To Text = no

#
# Attachment Filename Checking
# ----------------------------
#

# Set where to find the attachment filename ruleset.
# The structure of this file is explained elsewhere, but it is used to
# accept or reject file attachments based on their name, regardless of
# whether they are infected or not.
#
# This can also point to a ruleset, but the ruleset filename must end in
# ".rules" so that MailScanner can determine if the filename given is
# a ruleset or not!
Filename Rules = %etc-dir%/filename.rules.conf

# Set where to find the attachment filetype ruleset.
# The structure of this file is explained elsewhere, but it is used to
# accept or reject file attachments based on their content as determined
# by the "file" command, regardless of whether they are infected or not.
#
# This can also point to a ruleset, but the ruleset filename must end in
# ".rules" so that MailScanner can determine if the filename given is
# a ruleset or not!
#
# To disable this feature, set this to just "Filetype Rules =" or set
# the location of the file command to a blank string.
Filetype Rules = %etc-dir%/filetype.rules.conf

#
# Reports and Responses
# ---------------------
#

# Do you want to store copies of the infected attachments and messages?
# This can also be the filename of a ruleset.
Quarantine Infections = yes

# There is no point quarantining most viruses these days as the infected
# messages contain no useful content, so if you set this to "no" then no
# infections listed in your "Silent Viruses" setting will be quarantined,
# even if you have chosen to quarantine infections in general. This is
# currently set to "yes" so the behaviour is the same as it was in
# previous versions.
# This can also be the filename of a ruleset.
Quarantine Silent Viruses = yes

# Do you want to quarantine the original *entire* message as well as
# just the infected attachments?
# This can also be the filename of a ruleset.
Quarantine Whole Message = no

# When you quarantine an entire message, do you want to store it as
# raw mail queue files (so you can easily send them onto users) or
# as human-readable files (header then body in 1 file)?
Quarantine Whole Messages As Queue Files = no

# Set where to find all the strings used so they can be translated into
# your local language.
# This can also be the filename of a ruleset so you can produce different
# languages for different messages.
Language Strings = %report-dir%/languages.conf

# Set where to find the message text sent to users when one of their
# attachments has been deleted from a message.
# These can also be the filenames of rulesets.
Deleted Bad Content Message Report = %report-dir%/deleted.content.message.txt
Deleted Bad Filename Message Report = %report-dir%/deleted.filename.message.txt
Deleted Virus Message Report = %report-dir%/deleted.virus.message.txt

# Set where to find the message text sent to users when one of their
# attachments has been deleted from a message and stored in the quarantine.
# These can also be the filenames of rulesets.
Stored Bad Content Message Report = %report-dir%/stored.content.message.txt
Stored Bad Filename Message Report = %report-dir%/stored.filename.message.txt
Stored Virus Message Report = %report-dir%/stored.virus.message.txt

# Set where to find the message text sent to users explaining about the
# attached disinfected documents.
# This can also be the filename of a ruleset.
Disinfected Report = %report-dir%/disinfected.report.txt

# Set where to find the HTML and text versions that will be added to the
# end of all clean messages, if "Sign Clean Messages" is set.
# These can also be the filenames of rulesets.
Inline HTML Signature = %report-dir%/inline.sig.html
Inline Text Signature = %report-dir%/inline.sig.txt

# Set where to find the HTML and text versions that will be inserted at
# the top of messages that have had viruses removed from them.
# These can also be the filenames of rulesets.
Inline HTML Warning = %report-dir%/inline.warning.html
Inline Text Warning = %report-dir%/inline.warning.txt

# Set where to find the messages that are delivered to the sender, when they
# sent an email containing either an error, banned content, a banned filename
# or a virus infection.
# These can also be the filenames of rulesets.
Sender Content Report = %report-dir%/sender.content.report.txt
Sender Error Report = %report-dir%/sender.error.report.txt
Sender Bad Filename Report = %report-dir%/sender.filename.report.txt
Sender Virus Report = %report-dir%/sender.virus.report.txt

# Hide the directory path from all virus scanner reports sent to users.
# The extra directory paths give away information about your setup, and
# tend to just confuse users.
# This can also be the filename of a ruleset.
Hide Incoming Work Dir = yes

# Include the name of the virus scanner in each of the scanner reports.
# This also includes the translation of "MailScanner" in each of the report
# lines resulting from one of MailScanner's own checks such as filename,
# filetype or dangerous HTML content. To change the name "MailScanner", look
# in reports/...../languages.conf.
#
# Very useful if you use several virus scanners, but a bad idea if you
# don't want to let your customers know which scanners you use.
Include Scanner Name In Reports = yes

#
# Changes to Message Headers
# --------------------------
#

# Add this extra header to all mail as it is processed.
# This *must* include the colon ":" at the end.
# This can also be the filename of a ruleset.
Mail Header = X-%org-name%-MailScanner:

# Add this extra header to all messages found to be spam.
# This can also be the filename of a ruleset.
Spam Header = X-%org-name%-MailScanner-SpamCheck:

# Add this extra header if "Spam Score" = yes. The header will
# contain 1 character for every point of the SpamAssassin score.
Spam Score Header = X-%org-name%-MailScanner-SpamScore:

# Add this extra header to all mail as it is processed.
# The contents is set by "Information Header Value" and is intended for
# you to be able to insert a help URL for your users.
# If you don't want an information header at all, just comment out this
# setting or set it to be blank.
# This can also be the filename of a ruleset.
Information Header = X-%org-name%-MailScanner-Information:

# Do you want to add the Envelope-From: header?
# This is very useful for tracking where spam came from as it
# contains the envelope sender address.
# This can also be the filename of a ruleset.
Add Envelope From Header = yes

# Do you want to add the Envelope-To: header?
# This can be useful for tracking span destinations, but should be
# used with care due to possible privacy concerns with the use of
# Bcc: headers by users.
# This can also be the filename of a ruleset.
Add Envelope To Header = no

# This is the name of the Envelope From header
# controlled by the option above.
# This can also be the filename of a ruleset.
Envelope From Header = X-MailScanner-From:

# This is the name of the Envelope To header
# controlled by the option above.
# This can also be the filename of a ruleset.
Envelope To Header = X-MailScanner-To:

# The character to use in the "Spam Score Header".
# Don't use: x as a score of 3 is "xxx" which the users will think is porn,
# # as it will cause confusion with comments in procmail as well
# as MailScanner itself,
# * as it will cause confusion with pattern matches in procmail,
# . as it will cause confusion with pattern matches in procmail,
# ? as it will cause the users to think something went wrong.
# "s" is nice and safe and stands for "spam".
Spam Score Character = s

# If this option is set to yes, you will get a spam-score header saying just
# the value of the spam score, instead of the row of characters representing
# the score.
# This can also be the filename of a ruleset.
SpamScore Number Instead Of Stars = no

# This sets the minimum number of "Spam Score Characters" which will appear
# if a message triggered the "Spam List" setting but received a very low
# SpamAssassin score. This means that people who only filter on the "Spam
# Stars" will still be able to catch messages which receive a very low
# SpamAssassin score. Set this value to 0 to disable it.
# This can also be the filename of a ruleset.
Minimum Stars If On Spam List = 0

# Set the "Mail Header" to these values for clean/infected/disinfected messages.
# This can also be the filename of a ruleset.
Clean Header Value = Found to be clean
Infected Header Value = Found to be infected
Disinfected Header Value = Disinfected

# Set the "Information Header" to this value.
# This can also be the filename of a ruleset.
Information Header Value = Please contact the ISP for more information

# Do you want the full spam report, or just a simple "spam / not spam" report?
Detailed Spam Report = yes

# Do you want to include the numerical scores in the detailed SpamAssassin
# report, or just list the names of the scores
Include Scores In SpamAssassin Report = yes

# Do you want to always include the Spam Report in the SpamCheck
# header, even if the message wasn't spam?
# This can also be the filename of a ruleset.
Always Include SpamAssassin Report = no

# What to do when you get several MailScanner headers in one message,
# from multiple MailScanner servers. Values are
# "append" : Append the new data to the existing header
# "add" : Add a new header
# "replace" : Replace the old data with the new data
# Default is "append"
# This can also be the filename of a ruleset.
Multiple Headers = append

# Name of this host, or a name like "the MailScanner" if you want to hide
# the real hostname. It is used in the Help Desk note contained in the
# virus warnings sent to users.
# This can also be the filename of a ruleset.
Hostname = the %org-name% MailScanner

# If this is "no", then (as far as possible) messages which have already
# been processed by another MailScanner server will not have the clean
# signature added to the message. This prevents messages getting many
# copies of the signature as they flow through your site.
# This can also be the filename of a ruleset.
Sign Messages Already Processed = no

# Add the "Inline HTML Signature" or "Inline Text Signature" to the end
# of uninfected messages?
# This can also be the filename of a ruleset.
Sign Clean Messages = no

# Add the "Inline HTML Warning" or "Inline Text Warning" to the top of
# messages that have had attachments removed from them?
# This can also be the filename of a ruleset.
Mark Infected Messages = yes

# When a message is to not be virus-scanned (which may happen depending
# upon the setting of "Virus Scanning", especially if it is a ruleset),
# do you want to add the header advising the users to get their email
# virus-scanned by you?
# Very good for advertising your MailScanning service and encouraging
# users to give you some more money and sign up to virus scanning.
# This can also be the filename of a ruleset.
Mark Unscanned Messages = yes

# This is the text used by the "Mark Unscanned Messages" option above.
# This can also be the filename of a ruleset.
Unscanned Header Value = Not scanned: please contact your Internet E-Mail Service Provider for details

# Do you want to deliver messages once they have been cleaned of any
# viruses?
# By making this a ruleset, you can re-create the "Deliver From Local"
# facility of previous versions.
Deliver Cleaned Messages = yes

#
# Notifications back to the senders of blocked messages
# -----------------------------------------------------
#

# Do you want to notify the people who sent you messages containing
# viruses or badly-named filenames?
# This can also be the filename of a ruleset.
Notify Senders = yes

# *If* "Notify Senders" is set to yes, do you want to notify people
# who sent you messages containing viruses?
# The default value has been changed to "no" as most viruses now fake
# sender addresses and therefore should be on the "Silent Viruses" list.
# This can also be the filename of a ruleset.
Notify Senders Of Viruses = no

# *If* "Notify Senders" is set to yes, do you want to notify people
# who sent you messages containing attachments that are blocked due to
# their filename or file contents?
# This can also be the filename of a ruleset.
Notify Senders Of Blocked Filenames Or Filetypes = yes

# *If* "Notify Senders" is set to yes, do you want to notify people
# who sent you messages containing other blocked content, such as
# partial messages or messages with external bodies?
# This can also be the filename of a ruleset.
Notify Senders Of Other Blocked Content = yes

# If you supply a space-separated list of message "precedence" settings,
# then senders of those messages will not be warned about anything you
# rejected. This is particularly suitable for mailing lists, so that any
# MailScanner responses do not get sent to the entire list.
Never Notify Senders Of Precedence = list bulk

#
# Changes to the Subject: line
# ----------------------------
#

# When the message has been scanned but no other subject line changes
# have happened, do you want modify the subject line?
# This can be 1 of 3 values:
# no = Do not modify the subject line, or
# start = Add text to the start of the subject line, or
# end = Add text to the end of the subject line.
# This makes very good advertising of your MailScanning service.
# This can also be the filename of a ruleset.
Scanned Modify Subject = no # end

# This is the text to add to the start/end of the subject line if the
# "Scanned Modify Subject" option is set.
# This can also be the filename of a ruleset.
Scanned Subject Text = {Scanned}

# If the message contained a virus, do you want to modify the subject line?
# This makes filtering in Outlook very easy.
# This can also be the filename of a ruleset.
Virus Modify Subject = yes

# This is the text to add to the start of the subject if the
# "Virus Modify Subject" option is set.
# This can also be the filename of a ruleset.
Virus Subject Text = {Virus?}

# If an attachment triggered a filename check, but there was nothing
# else wrong with the message, do you want to modify the subject line?
# This makes filtering in Outlook very easy.
# This can also be the filename of a ruleset.
Filename Modify Subject = yes

# This is the text to add to the start of the subject if the
# "Filename Modify Subject" option is set.
# You might want to change this so your users can see at a glance
# whether it just was just the filename that MailScanner rejected.
# This can also be the filename of a ruleset.
Filename Subject Text = {Filename?}

# If an attachment triggered a content check, but there was nothing
# else wrong with the message, do you want to modify the subject line?
# This makes filtering in Outlook very easy.
# This can also be the filename of a ruleset.
Content Modify Subject = yes

# This is the text to add to the start of the subject if the
# "Content Modify Subject" option is set.
# You might want to change this so your users can see at a glance
# whether it just was just the content that MailScanner rejected.
# This can also be the filename of a ruleset.
Content Subject Text = {Blocked Content}

# If the message is spam, do you want to modify the subject line?
# This makes filtering in Outlook very easy.
# This can also be the filename of a ruleset.
Spam Modify Subject = yes

# This is the text to add to the start of the subject if the
# "Spam Modify Subject" option is set.
# The exact string "_SCORE_" will be replaced by the numeric
# SpamAssassin score.
# This can also be the filename of a ruleset.
Spam Subject Text = {Spam?}

# This is just like the "Spam Modify Subject" option above, except that
# it applies then the score from SpamAssassin is higher than the
# "High SpamAssassin Score" value.
# This can also be the filename of a ruleset.
High Scoring Spam Modify Subject = yes

# This is just like the "Spam Subject Text" option above, except that
# it applies then the score from SpamAssassin is higher than the
# "High SpamAssassin Score" value.
# The exact string "_SCORE_" will be replaced by the numeric
# SpamAssassin score.
# This can also be the filename of a ruleset.
High Scoring Spam Subject Text = {Spam?}

#
# Changes to the Message Body
# ---------------------------
#

# When a virus or attachment is replaced by a plain-text warning,
# should the warning be in an attachment? If "no" then it will be
# placed in-line. This can also be the filename of a ruleset.
Warning Is Attachment = yes

# When a virus or attachment is replaced by a plain-text warning,
# and that warning is an attachment, this is the filename of the
# new attachment.
# This can also be the filename of a ruleset.
Attachment Warning Filename = %org-name%-Attachment-Warning.txt

# What character set do you want to use for the attachment that
# replaces viruses (VirusWarning.txt)?
# The default is "us-ascii" but if you speak anything other than
# English, you will probably want "ISO-8859-1" instead.
# This can also be the filename of a ruleset.
Attachment Encoding Charset = us-ascii

#
# Mail Archiving and Monitoring
# -----------------------------
#

# Space-separated list of any combination of
# 1. email addresses to which mail should be forwarded,
# 2. directory names where you want mail to be stored,
# 3. file names (they must already exist!) to which mail will be appended
# in "mbox" format suitable for most Unix mail systems.
#
# If you give this option a ruleset, you can control exactly whose mail
# is archived or forwarded. If you do this, beware of the legal implications
# as this could be deemed to be illegal interception unless the police have
# asked you to do this.
#Archive Mail = /var/spool/MailScanner/archive
Archive Mail =

#
# Notices to System Administrators
# --------------------------------
#

# Notify the local system administrators ("Notices To") when any infections
# are found?
# This can also be the filename of a ruleset.
Send Notices = yes

# Include the full headers of each message in the notices sent to the local
# system administrators?
# This can also be the filename of a ruleset.
Notices Include Full Headers = no

# Hide the directory path from all the system administrator notices.
# The extra directory paths give away information about your setup, and
# tend to just confuse users but are still useful for local sys admins.
# This can also be the filename of a ruleset.
Hide Incoming Work Dir in Notices = no

# What signature to add to the bottom of the notices.
# To insert a line-break in there, use the sequence "n".
Notice Signature = -- nMailScannernEmail Virus Scannernwww.mailscanner.info

# The visible part of the email address used in the "From:" line of the
# notices. The <user@domain> part of the email address is set to the
# "Local Postmaster" setting.
Notices From = MailScanner

# Where to send the notices.
# This can also be the filename of a ruleset.
Notices To = postmaster

# Address of the local Postmaster, which is used as the "From" address in
# virus warnings sent to users.
# This can also be the filename of a ruleset.
Local Postmaster = postmaster

#
# Spam Detection and Virus Scanner Definitions
# --------------------------------------------
#

# This is the name of the file that translates the names of the "Spam List"
# values to the real DNS names of the spam blacklists.
Spam List Definitions = %etc-dir%/spam.lists.conf

# This is the name of the file that translates the names of the virus
# scanners into the commands that have to be run to do the actual scanning.
Virus Scanner Definitions = %etc-dir%/virus.scanners.conf

#
# Spam Detection and Spam Lists (DNS blocklists)
# ----------------------------------------------
#

# Do you want to check messages to see if they are spam?
# Note: If you switch this off then *no* spam checks will be done at all.
# This includes both MailScanner's own checks and SpamAssassin.
# If you want to just disable the "Spam List" feature then set
# "Spam List =" (i.e. an empty list) in the setting below.
# This can also be the filename of a ruleset.
Spam Checks = yes

# This is the list of spam blacklists (RBLs) which you are using.
# See the "Spam List Definitions" file for more information about what
# you can put here.
# This can also be the filename of a ruleset.
Spam List = ORDB-RBL SBL+XBL # MAPS-RBL+ costs money (except .ac.uk)

# This is the list of spam domain blacklists which you are using
# (such as the "rfc-ignorant" domains). See the "Spam List Definitions"
# file for more information about what you can put here.
# This can also be the filename of a ruleset.
Spam Domain List =

# If a message appears in at least this number of "Spam Lists" (as defined
# above), then the message will be treated as "High Scoring Spam" and so
# the "High Scoring Spam Actions" will happen. You probably want to set
# this to 2 if you are actually using this feature. 5 is high enough that
# it will never happen unless you use lots of "Spam Lists".
# This can also be the filename of a ruleset.
Spam Lists To Reach High Score = 3

# If an individual "Spam List" or "Spam Domain List" check takes longer
# that this (in seconds), the check is abandoned and the timeout noted.
Spam List Timeout = 10

# The maximum number of timeouts caused by any individual "Spam List" or
# "Spam Domain List" before it is marked as "unavailable". Once marked,
# the list will be ignored until the next automatic re-start (see
# "Restart Every" for the longest time it will wait).
# This can also be the filename of a ruleset.
Max Spam List Timeouts = 7

# The total number of Spam List attempts during which "Max Spam List Timeouts"
# will cause the spam list fo be marked as "unavailable". See the previous
# comment for more information.
# The default values of 5 and 10 mean that 5 timeouts in any sequence of 10
# attempts will cause the list to be marked as "unavailable" until the next
# periodic restart (see "Restart Every").
Spam List Timeouts History = 10

# Spam Whitelist:
# Make this point to a ruleset, and anything in that ruleset whose value
# is "yes" will *never* be marked as spam.
# This can also be the filename of a ruleset.
#Is Definitely Not Spam = no
Is Definitely Not Spam = %rules-dir%/spam.whitelist.rules

# Spam Blacklist:
# Make this point to a ruleset, and anything in that ruleset whose value
# is "yes" will *always* be marked as spam.
# This can also be the filename of a ruleset.
Is Definitely Spam = no

# Setting this to yes means that spam found in the blacklist is treated
# as "High Scoring Spam" in the "Spam Actions" section below. Setting it
# to no means that it will be treated as "normal" spam.
# This can also be the filename of a ruleset.
Definite Spam Is High Scoring = no

# Spammers have learnt that they can get their message through by sending
# a message with lots of recipients, one of which chooses to whitelist
# everything coming to them, including the spammer.
# So if a message arrives with more than this number of recipients, ignore
# the "Is Definitely Not Spam" whitelist.
Ignore Spam Whitelist If Recipients Exceed = 20

#
# SpamAssassin
# ------------
#

# Do you want to find spam using the "SpamAssassin" package?
# This can also be the filename of a ruleset.
Use SpamAssassin = yes

# SpamAssassin is not very fast when scanning huge messages, so messages
# bigger than this value will be truncated to this length for SpamAssassin
# testing. The original message will not be affected by this. This value
# is a good compromise as very few spam messages are bigger than this.
Max SpamAssassin Size = 30000

# This replaces the SpamAssassin configuration value 'required_hits'.
# If a message achieves a SpamAssassin score higher than this value,
# it is spam. See also the High SpamAssassin Score configuration option.
# This can also be the filename of a ruleset, so the SpamAssassin
# required_hits value can be set to different values for different messages.
Required SpamAssassin Score = 6

# If a message achieves a SpamAssassin score higher than this value,
# then the "High Scoring Spam Actions" are used. You may want to use
# this to deliver moderate scores, while deleting very high scoring messsages.
# This can also be the filename of a ruleset.
High SpamAssassin Score = 10

# Set this option to "yes" to enable the automatic whitelisting functions
# available within SpamAssassin. This will cause addresses from which you
# get real mail, to be marked so that it will never incorrectly spam-tag
# messages from those addresses.
SpamAssassin Auto Whitelist = no

# Set the location of the SpamAssassin user_prefs file. If you want to
# stop SpamAssassin doing all the RBL checks again, then you can add
# "skip_rbl_checks = 1" to this prefs file.
SpamAssassin Prefs File = %etc-dir%/spam.assassin.prefs.conf

# If SpamAssassin takes longer than this (in seconds), the check is
# abandoned and the timeout noted.
SpamAssassin Timeout = 40

# If SpamAssassin times out more times in a row than this, then it will be
# marked as "unavailable" until MailScanner next re-starts itself.
# This means that remote network failures causing SpamAssassin trouble will
# not mean your mail stops flowing.
Max SpamAssassin Timeouts = 20

# The total number of SpamAssassin attempts during which "Max SpamAssassin
# Timeouts" will cause SpamAssassin to be marked as "unavailable".
# See the previous comment for more information.
# The default values of 10 and 20 mean that 10 timeouts in any sequence of
# 20 attempts will trigger the behaviour described above, until the next
# periodic restart (see "Restart Every").
SpamAssassin Timeouts History = 30

# If the message sender is on any of the Spam Lists, do you still want
# to do the SpamAssassin checks? Setting this t
Go to the top of the page
 
+Quote Post
cpufixrman
post Jul 18 2004, 07:36 AM
Post #2


Whats this Lie-nix Thing?
*

Group: Members
Posts: 5
Joined: 18-July 04
Member No.: 3,368



I missed part of the maillog entry. Here is the complete section for this one email.

Jul 18 05:09:40 etek1 postfix/smtpd[13545]: connect from 61-229-165-141.dynamic.hinet.net[61.229.165.141]
Jul 18 05:09:44 etek1 postfix/smtpd[13545]: D8A58132E69: client=61-229-165-141.dynamic.hinet.net[61.229.165.141]
Jul 18 05:09:50 etek1 postfix/cleanup[13547]: D8A58132E69: message-id=<GZBRFGATQUSSBYJDANTNRTF@net-quest.com>
Jul 18 05:09:50 etek1 postfix/nqmgr[13293]: D8A58132E69: from=<migahfwnvehem@mail2000.com.tw>, size=2511, nrcpt=1 (queue active)
Jul 18 05:09:51 etek1 spamd[2062]: connection from etek1.inhomepc.net [127.0.0.1] at port 32775
Jul 18 05:09:51 etek1 spamd[13551]: info: setuid to nobody succeeded
Jul 18 05:09:51 etek1 spamd[13551]: Creating default_prefs [//.spamassassin/user_prefs]
Jul 18 05:09:51 etek1 spamd[13551]: Cannot write to //.spamassassin/user_prefs: No such file or directory
Jul 18 05:09:51 etek1 spamd[13551]: Couldn't create readable default_prefs for [//.spamassassin/user_prefs]
Jul 18 05:09:51 etek1 spamd[13551]: processing message <GZBRFGATQUSSBYJDANTNRTF@net-quest.com> for nobody:99.
Jul 18 05:09:53 etek1 postfix/smtpd[13545]: disconnect from 61-229-165-141.dynamic.hinet.net[61.229.165.141]
Jul 18 05:10:21 etek1 spamd[13551]: identified spam (9.2/4.5) for nobody:99 in 30.6 seconds, 2447 bytes.
Jul 18 05:10:21 etek1 postfix/pickup[13292]: 87979132E6B: uid=99 from=<migahfwnvehem@mail2000.com.tw>
Jul 18 05:10:21 etek1 postfix/cleanup[13547]: 87979132E6B: message-id=<GZBRFGATQUSSBYJDANTNRTF@net-quest.com>
Jul 18 05:10:21 etek1 postfix/pipe[13549]: D8A58132E69: to=<cpu-ernie@inhomepc.net>, relay=spamassassin, delay=37, status=sent (etek1.inhomepc.net)
Jul 18 05:10:21 etek1 postfix/nqmgr[13293]: 87979132E6B: from=<migahfwnvehem@mail2000.com.tw>, size=4704, nrcpt=1 (queue active)
Jul 18 05:10:21 etek1 postfix/nqmgr[13293]: 87979132E6B: to=<cpu-ernie@inhomepc.net>, relay=none, delay=0, status=deferred (deferred transport)
Jul 18 05:10:23 etek1 MailScanner[13359]: New Batch: Scanning 1 messages, 4920 bytes
Jul 18 05:10:31 etek1 MailScanner[13359]: Spam Checks: Found 1 spam messages
Jul 18 05:10:33 etek1 MailScanner[13359]: Virus and Content Scanning: Starting
Jul 18 05:10:33 etek1 MailScanner[13359]: Content Checks: Detected HTML-specific exploits in 87979132E6B
Jul 18 05:10:33 etek1 MailScanner[13359]: Content Checks: Found 1 problems
Jul 18 05:10:33 etek1 MailScanner[13359]: Content Checks: Detected and will disarm HTML message in 87979132E6B
Jul 18 05:10:34 etek1 MailScanner[13359]: Saved infected "msg-13359-1.html" to /var/spool/MailScanner/quarantine/20040718/87979132E6B
Jul 18 05:10:34 etek1 MailScanner[13359]: Requeue: 87979132E6B to 970195007D
Jul 18 05:10:34 etek1 postfix/nqmgr[13341]: 970195007D: from=<migahfwnvehem@mail2000.com.tw>, size=5237, nrcpt=1 (queue active)
Jul 18 05:10:34 etek1 MailScanner[13359]: Silent: Delivered 1 messages containing silent viruses
Jul 18 05:10:34 etek1 postfix/nqmgr[13341]: 970195007D: to=<cpu-ernie@inhomepc.net>, relay=none, delay=13, status=deferred (deferred transport)
Jul 18 05:10:34 etek1 MailScanner[13359]: Notices: Warned about 1 messages
Jul 18 05:10:34 etek1 postfix/pickup[13340]: 8A0725007E: uid=89 from=<postmaster>
Jul 18 05:10:34 etek1 postfix/cleanup[13570]: 8A0725007E: message-id=<20040718121034.8A0725007E@etek1.inhomepc.net>
Jul 18 05:10:34 etek1 postfix/nqmgr[13341]: 8A0725007E: from=<postmaster@inhomepc.net>, size=740, nrcpt=1 (queue active)
Jul 18 05:10:34 etek1 postfix/nqmgr[13341]: 8A0725007E: to=<postmaster@inhomepc.net>, relay=none, delay=0, status=deferred (deferred transport)


After running postfix flush, I found this email in my sysmail (postmaster) in box:

RFC822 Message body
Return-Path: <postmaster@inhomepc.net>
X-Original-To: postmaster@inhomepc.net
Delivered-To: sysmail@inhomepc.net
Received: by etek1.inhomepc.net (Postfix, from userid 89)
id 8A0725007E; Sun, 18 Jul 2004 05:10:34 -0700 (PDT)
From: "MailScanner" <postmaster@inhomepc.net>
To: postmaster@inhomepc.net
Subject: Warning: E-mail viruses detected
Message-Id: <20040718121034.8A0725007E@etek1.inhomepc.net>
Date: Sun, 18 Jul 2004 05:10:34 -0700 (PDT)

The following e-mail messages were found to have viruses in them:

Sender: migahfwnvehem@mail2000.com.tw
IP Address: 127.0.0.1
Recipient: cpu-ernie@inhomepc.net
Subject: *****SPAM***** stop feeling guilty about spying?
MessageID: 87979132E6B
Report: MailScanner: Found dangerous IFrame tag in HTML message


--
MailScanner
Email Virus Scanner
www.mailscanner.info


I hope this makes sense to someone.

I apologize if this seems too long of a post.

Ernie Aldama
Go to the top of the page
 
+Quote Post
hughesjr
post Jul 18 2004, 10:49 AM
Post #3


Its GNU/Linuxhelp.net
*******

Group: Admin
Posts: 3,433
Joined: 25-July 03
From: Corpus Chrsiti, TX, USA
Member No.: 1,151



The entry:

alternate_config_directories = /etc/postfix.in

is what I think is causing the problem.

There are 2 versions of postfix running ... on that accepts mail and dumps it into /var/spool/postfix.in/deferred until it is scanned by MailScanner ... then it gets moved by MailScanner to /var/spool/postfix/incoming for delivery. However;

When you use alternate_config_directories variable ... it reads the config file called /etc/postfix.in for both versions of postfix ... which will causes incoming mail (in /var/spool/postfix/incoming) to not be delivered ... in fact ... it seems the mail stays in /var/spool/postfix.in/deferred and MailScanner is not even running.

So ... I would remark out the:

alternate_config_directories = /etc/postfix.in


Then report the error and see if we can fix it...You should only start MailScanner and it will start both versions of PostFix.


--------------------
Johnny Hughes
hughesjr@linuxhelp.net
Enterprise Alternatives: CentOS, WhiteBoxEL
Favorite Workstation Distros (in order): CentOS, Gentoo, Debian Sarge, Ubuntu, Mandrake, FedoraCore, Slackware, SUSE
Favorite Server Distros (in order): CentOS, WhiteBoxEL, Debian Sarge, Slackware, Mandrake, FedoraCore, Gentoo, SUSE
Go to the top of the page
 
+Quote Post
cpufixrman
post Jul 18 2004, 02:25 PM
Post #4


Whats this Lie-nix Thing?
*

Group: Members
Posts: 5
Joined: 18-July 04
Member No.: 3,368



Thanks for the reply.

That was my thought too, but the error that came back referred me to that setting. Here is what is reported to /var/log/maillog after commenting that line out (sent from my hotmail acct so I can include the response):

QUOTE
Jul 18 12:17:45 etek1 postfix/smtpd[15651]: connect from bay2-dav2.bay2.hotmail.com[65.54.246.106]
Jul 18 12:17:45 etek1 postfix/smtpd[15651]: 2FF07132E69: client=bay2-dav2.bay2.hotmail.com[65.54.246.106]
Jul 18 12:17:45 etek1 postfix/cleanup[15653]: 2FF07132E69: message-id=<001901c46cfb$22bb5530$6401a8c0@etek3>
Jul 18 12:17:45 etek1 postfix/nqmgr[15581]: 2FF07132E69: from=<cpufixrman@hotmail.com>, size=2742, nrcpt=1 (queue active)
Jul 18 12:17:45 etek1 spamd[2062]: connection from etek1.inhomepc.net [127.0.0.1] at port 32892
Jul 18 12:17:45 etek1 postfix/smtpd[15651]: disconnect from bay2-dav2.bay2.hotmail.com[65.54.246.106]
Jul 18 12:17:45 etek1 spamd[15675]: info: setuid to nobody succeeded
Jul 18 12:17:45 etek1 spamd[15675]: Creating default_prefs [//.spamassassin/user_prefs]
Jul 18 12:17:45 etek1 spamd[15675]: Cannot write to //.spamassassin/user_prefs: No such file or directory
Jul 18 12:17:45 etek1 spamd[15675]: Couldn't create readable default_prefs for [//.spamassassin/user_prefs]
Jul 18 12:17:45 etek1 spamd[15675]: processing message <001901c46cfb$22bb5530$6401a8c0@etek3> for nobody:99.
Jul 18 12:18:16 etek1 spamd[15675]: clean message (0.0/4.5) for nobody:99 in 31.6 seconds, 2651 bytes.
Jul 18 19:18:16 etek1 postfix/postdrop[15677]: error: untrusted configuration directory name: /etc/postfix.in
Jul 18 19:18:16 etek1 postfix/postdrop[15677]: fatal: specify "alternate_config_directories = /etc/postfix.in" in /etc/postfix/main.cf
Jul 18 12:18:17 etek1 postfix/sendmail[15674]: warning: premature end-of-input on /usr/sbin/postdrop -r while reading input attribute name
Jul 18 12:18:17 etek1 postfix/sendmail[15674]: fatal: cpufixrman@hotmail.com(99): unable to execute /usr/sbin/postdrop -r: Success
Jul 18 12:18:19 etek1 postfix/pipe[15655]: 2FF07132E69: to=<ealdama@inhomepc.net>, relay=spamassassin, delay=34, status=bounced (service unavailable. Command output: postdrop: error: untrusted configuration directory name: /etc/postfix.in postdrop: fatal: specify "alternate_config_directories = /etc/postfix.in" in /etc/postfix/main.cf sendmail: warning: premature end-of-input on /usr/sbin/postdrop -r while reading input attribute name sendmail: fatal: cpufixrman@hotmail.com(99): unable to execute /usr/sbin/postdrop -r: Success )
Jul 18 12:18:19 etek1 postfix/cleanup[15653]: 07567132E6A: message-id=<20040718191819.07567132E6A@etek1.inhomepc.net>
Jul 18 12:18:19 etek1 postfix/nqmgr[15581]: 07567132E6A: from=<>, size=5142, nrcpt=1 (queue active)
Jul 18 12:18:19 etek1 postfix/nqmgr[15581]: 07567132E6A: to=<cpufixrman@hotmail.com>, relay=none, delay=0, status=deferred (deferred transport)


The response that was sent out is:

QUOTE
This is the Postfix program at host etek1.inhomepc.net.

I'm sorry to have to inform you that the message returned
below could not be delivered to one or more destinations.

For further assistance, please send mail to <postmaster>

If you do so, please include this problem report. You can
delete your own text from the message returned below.

  The Postfix program

<ealdama@inhomepc.net>: service unavailable. Command output: postdrop: error:
    untrusted configuration directory name: /etc/postfix.in postdrop: fatal:
    specify "alternate_config_directories = /etc/postfix.in" in
    /etc/postfix/main.cf sendmail: warning: premature end-of-input on
    /usr/sbin/postdrop -r while reading input attribute name sendmail: fatal:
    cpufixrman@hotmail.com(99): unable to execute /usr/sbin/postdrop -r:
    Success


One thing I noticed here, and I'm not sure how this fits in, but it seems I have to use postfix flus to push any mail, in any direction. This response was also stuck in the queue.

Is there a way I can attach my various configuration files here? If not, let me know where I can forward them for review.

Thanks again for your assistance.

Ernie Aldama
Go to the top of the page
 
+Quote Post
hughesjr
post Jul 18 2004, 05:05 PM
Post #5


Its GNU/Linuxhelp.net
*******

Group: Admin
Posts: 3,433
Joined: 25-July 03
From: Corpus Chrsiti, TX, USA
Member No.: 1,151



Looks like you have spamd running ... it's not supposed to be per the guide.

Do you have 2 postfix config files in /etc and 2 full postfix directories in /var?


--------------------
Johnny Hughes
hughesjr@linuxhelp.net
Enterprise Alternatives: CentOS, WhiteBoxEL
Favorite Workstation Distros (in order): CentOS, Gentoo, Debian Sarge, Ubuntu, Mandrake, FedoraCore, Slackware, SUSE
Favorite Server Distros (in order): CentOS, WhiteBoxEL, Debian Sarge, Slackware, Mandrake, FedoraCore, Gentoo, SUSE
Go to the top of the page
 
+Quote Post
cpufixrman
post Jul 18 2004, 06:04 PM
Post #6


Whats this Lie-nix Thing?
*

Group: Members
Posts: 5
Joined: 18-July 04
Member No.: 3,368



Ok,

spamd is not running now. Forgot that I still had that set when I was running standalone.

As for what I have, I have the following:

/var/spool/postfix.in with subdirs
/var/spool/postfix with subdirs

/etc/postfix.in/main.cf, master.cf, etc.
/etc/postfix/main.cf, master.cf, etc.

I did the copy, of postfix to postfix.in, as the guide suggested.

Anything else?
Go to the top of the page
 
+Quote Post
hughesjr
post Jul 18 2004, 07:17 PM
Post #7


Its GNU/Linuxhelp.net
*******

Group: Admin
Posts: 3,433
Joined: 25-July 03
From: Corpus Chrsiti, TX, USA
Member No.: 1,151



I just did a fresh install on a new machine following the guide (actually, I updated the guide at my homepage during the install ... and I will update the page here soon ... for a new version of MailScanner).

Take a look at the updated guide and see if anything jumps out. Everything is working perfectly on my test server:

Updated Guide, part 4

Specifically, look at /etc/postfix/main.cf, /etc/postfix.in/main.cf, /etc/postfix/master.cf, and /etc/MailScanner/MailScanner.cf.
-----------------------------------------------
Here is the maillog for a message that I composed via squirrelmail and sent to an external server:
QUOTE
Jul 18 18:41:42 mail postfix/smtpd[16758]: 1E2397306B: client=mail.home.local[192.168.0.29], sasl_method=LOGIN, sasl_username=johnny
Jul 18 18:41:42 mail postfix/cleanup[16759]: 1E2397306B: message-id=<58637.192.168.0.4.1090194102.squirrel@192.168.0.4>
Jul 18 18:41:42 mail postfix/nqmgr[16682]: 1E2397306B: from=<johnny@home.local>, size=759, nrcpt=1 (queue active)
Jul 18 18:41:42 mail postfix/smtpd[16758]: disconnect from mail.home.local[192.168.0.29]
Jul 18 18:41:42 mail imapd[16762]: imap service init from 192.168.0.29
Jul 18 18:41:42 mail postfix/nqmgr[16682]: 1E2397306B: to=<jhughes@hughesjr.com>, relay=none, delay=0, status=deferred (deferred transport)
Jul 18 18:41:43 mail MailScanner[16748]: New Batch: Scanning 1 messages, 1092 bytes
Jul 18 18:41:45 mail MailScanner[16748]: Virus and Content Scanning: Starting
Jul 18 18:41:45 mail MailScanner[16748]: Requeue: 1E2397306B to 18C58633A4
Jul 18 18:41:45 mail postfix/nqmgr[16727]: 18C58633A4: from=<johnny@home.local>, size=926, nrcpt=1 (queue active)
Jul 18 18:41:45 mail MailScanner[16748]: Uninfected: Delivered 1 messages
Jul 18 18:41:45 mail postfix/smtp[16773]: 18C58633A4: to=<jhughes@hughesjr.com>, relay=mail.hughesjr.com[192.168.0.1], delay=3, status=sent (250 OK)


Here is the maillog for the delivery of a reply from off site to the above message:
QUOTE
Jul 18 18:43:59 mail postfix/smtpd[16774]: connect from server1[192.168.0.1]
Jul 18 18:44:00 mail postfix/smtpd[16774]: 03E8B7306B: client=server1[192.168.0.1]
Jul 18 18:44:00 mail postfix/smtpd[16774]: 1749B7306B: client=server1[192.168.0.1]
Jul 18 18:44:00 mail postfix/cleanup[16775]: 1749B7306B: message-id=<1090194239.8398.8.camel@Myth.home.local>
Jul 18 18:44:00 mail postfix/nqmgr[16682]: 1749B7306B: from=<jhughes@hughesjr.com>, size=1730, nrcpt=1 (queue active)
Jul 18 18:44:00 mail postfix/nqmgr[16682]: 1749B7306B: to=<johnny@home.local>, relay=none, delay=0, status=deferred (deferred transport)
Jul 18 18:44:00 mail postfix/smtpd[16774]: disconnect from server1[192.168.0.1]
Jul 18 18:44:01 mail MailScanner[16748]: New Batch: Scanning 1 messages, 2033 bytes
Jul 18 18:44:03 mail MailScanner[16748]: Virus and Content Scanning: Starting
Jul 18 18:44:03 mail MailScanner[16748]: Requeue: 1749B7306B to 0A243633A4
Jul 18 18:44:03 mail postfix/nqmgr[16727]: 0A243633A4: from=<jhughes@hughesjr.com>, size=1900, nrcpt=1 (queue active)
Jul 18 18:44:03 mail MailScanner[16748]: Uninfected: Delivered 1 messages
Jul 18 18:44:03 mail postfix/local[16782]: 0A243633A4: to=<johnny@home.local>, relay=local, delay=3, status=sent (mailbox)


--------------------
Johnny Hughes
hughesjr@linuxhelp.net
Enterprise Alternatives: CentOS, WhiteBoxEL
Favorite Workstation Distros (in order): CentOS, Gentoo, Debian Sarge, Ubuntu, Mandrake, FedoraCore, Slackware, SUSE
Favorite Server Distros (in order): CentOS, WhiteBoxEL, Debian Sarge, Slackware, Mandrake, FedoraCore, Gentoo, SUSE
Go to the top of the page
 
+Quote Post
cpufixrman
post Jul 18 2004, 09:37 PM
Post #8


Whats this Lie-nix Thing?
*

Group: Members
Posts: 5
Joined: 18-July 04
Member No.: 3,368



Well,

I have things better now. I restored my main.cf and master.cf files and started over. Now I can see mail passing in and out, but I have an error with spamd now. I will look at this some more, but here is the maillog entries when a message comes in:

[FONT=Courier]
QUOTE
Jul 18 19:36:39 etek1 postfix/smtpd[2277]: 767B013326E: client=bay2-dav17.bay2.hotmail.com[65.54.246.121]
Jul 18 19:36:39 etek1 postfix/cleanup[2280]: 767B013326E: message-id=<002201c46d38$722e4e50$6401a8c0@etek3>
Jul 18 19:36:39 etek1 postfix/nqmgr[1987]: 767B013326E: from=<cpufixrman@hotmail.com>, size=6053, nrcpt=1 (queue active)
Jul 18 19:36:39 etek1 postfix/smtpd[2277]: disconnect from bay2-dav17.bay2.hotmail.com[65.54.246.121]
Jul 18 19:36:39 etek1 spamc[2283]: connect() to spamd at 127.0.0.1 failed, retrying (1/3): Connection refused
Jul 18 19:36:40 etek1 spamc[2283]: connect() to spamd at 127.0.0.1 failed, retrying (2/3): Connection refused
Jul 18 19:36:41 etek1 spamc[2283]: connect() to spamd at 127.0.0.1 failed, retrying (3/3): Connection refused
Jul 18 19:36:42 etek1 spamc[2283]: connection attempt to spamd aborted after 3 retries
Jul 18 19:36:42 etek1 postfix/pickup[1986]: E5A16133271: uid=99 from=<cpufixrman@hotmail.com>
Jul 18 19:36:42 etek1 postfix/cleanup[2280]: E5A16133271: message-id=<002201c46d38$722e4e50$6401a8c0@etek3>
Jul 18 19:36:42 etek1 postfix/pipe[2282]: 767B013326E: to=<ealdama@inhomepc.net>, relay=spamassassin, delay=3, status=sent (etek1.inhomepc.net)
Jul 18 19:36:42 etek1 postfix/nqmgr[1987]: E5A16133271: from=<cpufixrman@hotmail.com>, size=6168, nrcpt=1 (queue active)
Jul 18 19:36:43 etek1 postfix/nqmgr[1987]: E5A16133271: to=<ealdama@inhomepc.net>, relay=none, delay=0, status=deferred (deferred transport)
Jul 18 19:36:43 etek1 MailScanner[2095]: New Batch: Scanning 1 messages, 6366 bytes
Jul 18 19:36:50 etek1 MailScanner[2095]: Virus and Content Scanning: Starting
Jul 18 19:36:50 etek1 MailScanner[2095]: Requeue: E5A16133271 to 3B22B5007D
Jul 18 19:36:50 etek1 postfix/nqmgr[2049]: 3B22B5007D: from=<cpufixrman@hotmail.com>, size=6360, nrcpt=1 (queue active)
Jul 18 19:36:50 etek1 MailScanner[2095]: Uninfected: Delivered 1 messages
Jul 18 19:36:50 etek1 postfix/local[2294]: 3B22B5007D: to=<ealdama@inhomepc.net>, relay=local, delay=8, status=sent (mailbox)



Thanks for the help. I guess as long as I can pass mail both ways now, this is better than not at all. I still have virus scans happening, now it's just getting SpamAssassin to work.

Ernie Aldama
Go to the top of the page
 
+Quote Post
hughesjr
post Jul 18 2004, 09:57 PM
Post #9


Its GNU/Linuxhelp.net
*******

Group: Admin
Posts: 3,433
Joined: 25-July 03
From: Corpus Chrsiti, TX, USA
Member No.: 1,151



If you have Spam Assassin set to yes in MailScanner.conf (Use SpamAssassin = yes) ... it uses SpamAssassin as well.

You shouldn't need to do anything to SpamAssassin except install it, set the MailScanner.conf per the guide and turn it off SpamAssassin with the command:

/etc/init.d/spamassassin stop
chkconfig spamassassin off


--------------------
Johnny Hughes
hughesjr@linuxhelp.net
Enterprise Alternatives: CentOS, WhiteBoxEL
Favorite Workstation Distros (in order): CentOS, Gentoo, Debian Sarge, Ubuntu, Mandrake, FedoraCore, Slackware, SUSE
Favorite Server Distros (in order): CentOS, WhiteBoxEL, Debian Sarge, Slackware, Mandrake, FedoraCore, Gentoo, SUSE
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 19th October 2017 - 08:00 AM