Linux Help
guides forums blogs
Home Desktops Distributions ISO Images Logos Newbies Reviews Software Support & Resources Linuxhelp Wiki

Welcome Guest ( Log In | Register )



Advanced DNS Management
New ZoneEdit. New Managment.

FREE DNS Is Back

Sign Up Now
 
Reply to this topicStart new topic
> Mandrake Start Problem, No screens
jazzari
post May 4 2004, 05:05 AM
Post #1


Whats this Lie-nix Thing?
*

Group: Members
Posts: 1
Joined: 4-May 04
Member No.: 2,884



I have installed Mandrake 10.0. When I type: startx it goes thru checks and then says: canīt start server, screens found but not installed . Imaginary memory too big ( 1024). This is my first Linux installation so I no nothing.
Go to the top of the page
 
+Quote Post
Jim
post May 4 2004, 10:39 AM
Post #2


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,280
Joined: 19-November 03
From: University of Minnesota- TC
Member No.: 1,828



Something is screwed up in your XF86Config file. You can edit this by firing up an editor and opening the file. What you will probably want to do if post the entire file on-line. That could be difficult if you don't have a working GUI in linux. If you have a USB pen I can show you how to save it and than print it out.

First gain root priviliage, either log in as root, or type su
Fist, check to see if your using an XF86Config or an XF86Config-4
type cd /etx/X11 than ls if you don't see a -4 file than your not using it, if you do, than you are.

Now plug in the usb pen move to your /mnt folder by typing cd /mnt

Now make a directory for it, say usb by typing mkdir usb, now mount the pen.

mount -t vfat /dev/sda1 usb

You can than copy the file by typing cp /etc/X11/XF86Config /mnt/usb if you had the XF86Config-4 file just subistute that in

Now, unmount the pen and you got it. To unmount just make sure your not in the usb folder and type umount /mnt/usb

Ok, so if you don't have a USB pen (go get one they are handy as snot) you can open in using an editor like emacs just type

emacs /etc/X11/XF86Config

What we are really interested in is the Server Layout Device and Screens Sections. If you can get those up we can probably fix it.

You will also probably need to install drivers for at the very least your video card. Tell us what kind of video card you have and what kind of monitor it is and we can get you started.


--------------------
--Jim Lester
jim@linuxhelp.net

Distro: Gentoo
System: AMD Athlon 3000+ XP 2.166 GHz
NVIDIA nForce2 IGP Chipset
1GB 333 MHz DDR SDRAM
NVIDIA nForce2 Dual Head 64 MB Graphics

Server Distro: CentOS
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 21st October 2017 - 01:52 AM