Linux Help
guides forums blogs
Home Desktops Distributions ISO Images Logos Newbies Reviews Software Support & Resources Linuxhelp Wiki

Welcome Guest ( Log In | Register )



Advanced DNS Management
New ZoneEdit. New Managment.

FREE DNS Is Back

Sign Up Now
 
Reply to this topicStart new topic
> Beeeeeeeeeeeeeeeeeeep Sound, (*niX newbee)
particle
post Apr 21 2004, 07:42 PM
Post #1


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



(Linux newbee)

ok...so weird problem:

after i start up kde i stat hearing a beep (somthing like the system (mobo) speaker would produce, then i hear kde load music trying to play over...rather under the beeeeeeeeeep sound. sound doesnt stop.

TIA! smile.gif [quote]OS: mandrake 10/win2ksp4
system: p4 w/ 256mb ram[/quote]

[quote]cat /proc/pci
PCI devices found:
  Bus  0, device  0, function  0:
    Host bridge: VIA Technologies, Inc. VT8753 [P4X266 AGP] (rev 1).
      Master Capable.  Latency=8.
      Prefetchable 32 bit memory at 0xd0000000 [0xd3ffffff].
  Bus  0, device  1, function  0:
    PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (rev 0).
      Master Capable.  No bursts.  Min Gnt=12.
  Bus  0, device  6, function  0:
    Communication controller: Lucent Microelectronics LT WinModem (rev 2).
      IRQ 9.
      Master Capable.  Latency=32.  Min Gnt=252.Max Lat=14.
      Non-prefetchable 32 bit memory at 0xd7000000 [0xd70000ff].
      I/O at 0x7000 [0x7007].
      I/O at 0x7400 [0x74ff].
  Bus  0, device  7, function  0:
    Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 16).
      IRQ 12.
      Master Capable.  Latency=32.  Min Gnt=32.Max Lat=64.
      I/O at 0x7800 [0x78ff].
      Non-prefetchable 32 bit memory at 0xd7001000 [0xd70010ff].
  Bus  0, device  9, function  0:
    Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 10).
      IRQ 11.
      Master Capable.  Latency=32.  Min Gnt=2.Max Lat=20.
      I/O at 0x7c00 [0x7c1f].
  Bus  0, device  9, function  1:
    Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 10).
      Master Capable.  Latency=32.
      I/O at 0x8000 [0x8007].
  Bus  0, device  17, function  0:
    ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge (rev 0).
  Bus  0, device  17, function  1:
    IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 6).
      Master Capable.  Latency=32.
      I/O at 0x8400 [0x840f].
  Bus  0, device  17, function  2:
    USB Controller: VIA Technologies, Inc. USB (rev 27).
      IRQ 12.
      Master Capable.  Latency=32.
      I/O at 0x8800 [0x881f].
  Bus  0, device  17, function  3:
    USB Controller: VIA Technologies, Inc. USB (#2) (rev 27).
      IRQ 12.
      Master Capable.  Latency=32.
      I/O at 0x8c00 [0x8c1f].
  Bus  0, device  17, function  4:
    USB Controller: VIA Technologies, Inc. USB (#3) (rev 27).
      IRQ 12.
      Master Capable.  Latency=32.
      I/O at 0x9000 [0x901f].
  Bus  1, device  0, function  0:
    VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 92).
      IRQ 11.
      Master Capable.  Latency=32.  Min Gnt=8.
      Non-prefetchable 32 bit memory at 0xd4000000 [0xd4ffffff].
      I/O at 0x6000 [0x60ff].
      Non-prefetchable 32 bit memory at 0xd6000000 [0xd6000fff].[/quote]


[quote]cat /etc/modules.conf

alias net-pf-4 ipx
probeall scsi_hostadapter imm ppa
alias eth0 8139too
above snd-emu10k1 snd-pcm-oss
alias sound-slot-0 snd-emu10k1
probeall usb-interface usb-uhci[/quote]

[quote]cat /proc/modules
md5 3872 1 - Live 0xd104c000
ipv6 232352 6 - Live 0xd10af000
sg 38044 0 - Live 0xd1061000
sr_mod 17060 0 - Live 0xd104f000
lp 12200 0 - Live 0xd1039000
snd-seq-midi 8160 0 - Live 0xd1418000
snd-emu10k1-synth 6816 0 - Live 0xd1369000
snd-emux-synth 36320 1 snd-emu10k1-synth, Live 0xd144d000
snd-seq-virmidi 6912 1 snd-emux-synth, Live 0xd1347000
snd-seq-midi-emul 7776 1 snd-emux-synth, Live 0xd1344000
snd-seq-oss 31232 0 - Live 0xd1444000
snd-seq-midi-event 7552 3 snd-seq-midi,snd-seq-virmidi,snd-seq-oss, Live 0xd1341000
snd-seq 51024 8 snd-seq-midi,snd-emux-synth,snd-seq-virmidi,snd-seq-midi-emul,snd-seq-oss,snd-seq-midi-event, Live 0xd1436000
snd-pcm-oss 51812 0 - Live 0xd1428000
snd-mixer-oss 17952 1 snd-pcm-oss, Live 0xd1396000
snd-emu10k1 85508 1 snd-emu10k1-synth, Live 0xd139e000
snd-rawmidi 23616 3 snd-seq-midi,snd-seq-virmidi,snd-emu10k1, Live 0xd1351000
snd-pcm 93156 2 snd-pcm-oss,snd-emu10k1, Live 0xd136d000
snd-timer 24484 2 snd-seq,snd-pcm, Live 0xd134a000
snd-seq-device 8008 7 snd-seq-midi,snd-emu10k1-synth,snd-emux-synth,snd-seq-oss,snd-seq,snd-emu10k1,snd-rawmidi, Live 0xd133e000
snd-ac97-codec 58148 1 snd-emu10k1, Live 0xd131f000
snd-page-alloc 11972 2 snd-emu10k1,snd-pcm, Live 0xd117a000
snd-util-mem 4448 2 snd-emux-synth,snd-emu10k1, Live 0xd12e8000
snd-hwdep 8928 2 snd-emux-synth,snd-emu10k1, Live 0xd1278000
snd 52484 16 snd-seq-midi,snd-emux-synth,snd-seq-virmidi,snd-seq-oss,snd-seq-midi-event,snd-seq,snd-pcm-oss,snd-mixer-oss,snd-emu10k1,snd-rawmidi,snd-pcm,snd-timer,snd-seq-device,snd-ac97-codec,snd-util-mem,snd-hwdep, Live 0xd1330000
soundcore 9248 1 snd, Live 0xd1274000
af_packet 20520 2 - Live 0xd12e1000
ide-floppy 18752 0 - Live 0xd12db000
ide-tape 34864 0 - Live 0xd1315000
ide-cd 40548 0 - Live 0xd130a000
cdrom 37184 2 sr_mod,ide-cd, Live 0xd12ff000
floppy 59444 0 - Live 0xd12ef000
8139too 23712 0 - Live 0xd129b000
mii 4992 1 8139too, Live 0xd123d000
ntfs 85932 1 - Live 0xd12a4000
nls_iso8859-1 3904 17 - Live 0xd112f000
nls_cp850 4736 16 - Live 0xd123a000
vfat 13760 16 - Live 0xd126f000
fat 45120 1 vfat, Live 0xd127d000
supermount 37876 1 - Live 0xd1226000
via-agp 7360 1 - Live 0xd1177000
agpgart 31016 1 via-agp, Live 0xd1231000
ppa 12296 0 - Live 0xd1172000
parport_pc 32832 1 - Live 0xd121c000
imm 12360 0 - Live 0xd116d000
scsi_mod 114744 4 sg,sr_mod,ppa,imm, Live 0xd1240000
parport 38952 4 lp,ppa,parport_pc,imm, Live 0xd1211000
usblp 12256 0 - Live 0xd114d000
joydev 10240 0 - Live 0xd1135000
tsdev 7168 0 - Live 0xd1021000
evdev 9504 0 - Live 0xd1139000
usbmouse 5216 0 - Live 0xd112c000
hid 53312 0 - Live 0xd117e000
uhci-hcd 29104 0 - Live 0xd113f000
usbcore 99132 6 usblp,usbmouse,hid,uhci-hcd, Live 0xd1153000
rtc 11576 0 - Live 0xd1131000
ext3 110376 1 - Live 0xd1005000
jbd 54328 1 ext3, Live 0xd111d000[/quote]

[quote]ls -L -l /dev/dsp*
crw-------  1 particle audio 14, 3 Jan  1  1970 /dev/dsp[/quote]
Go to the top of the page
 
+Quote Post
particle
post Apr 21 2004, 08:14 PM
Post #2


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



EDIT: its when linux strats up...not just kde.
Go to the top of the page
 
+Quote Post
Jim
post Apr 21 2004, 11:28 PM
Post #3


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,280
Joined: 19-November 03
From: University of Minnesota- TC
Member No.: 1,828



does is stop ever? Does your sound work afterwords? And have you installed the drivers/modules for your soundcard?


--------------------
--Jim Lester
jim@linuxhelp.net

Distro: Gentoo
System: AMD Athlon 3000+ XP 2.166 GHz
NVIDIA nForce2 IGP Chipset
1GB 333 MHz DDR SDRAM
NVIDIA nForce2 Dual Head 64 MB Graphics

Server Distro: CentOS
Go to the top of the page
 
+Quote Post
particle
post Apr 21 2004, 11:43 PM
Post #4


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



ok lil bit more info:

i reinstalled mandrake 10 again to see if it fixes the anomaly here is some posibly usefull data:

1) beeeeep sound was non existant till after KDE started loading (globe icon or one b4 it) the FIRST time
2) after that first time the beep is there AS SOON AS login prompt comes up.

[to answer the question] 3) NO the "noise" NEVER ends




i havent installed anything else except what mandrake 10 installed for me
Go to the top of the page
 
+Quote Post
hughesjr
post Apr 22 2004, 06:52 AM
Post #5


Its GNU/Linuxhelp.net
*******

Group: Admin
Posts: 3,433
Joined: 25-July 03
From: Corpus Chrsiti, TX, USA
Member No.: 1,151



I have a very similar test machine (it is a VIA Apollo PRO133x, PIII 800mhz machine with a soundblaster live).

I haven't had any problems with sound at all.

Have you upgraded to the latest packages from Mandrake ...

If not and you have broadband internet, do this (as root from the terminal):

urpmi.removemedia -a

then this:

CODE
urpmi.addmedia Disk_1 http://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/10.0/i586/Mandrake/RPMS with ../base/synthesis.hdlist.cz

urpmi.addmedia Disk_2 http://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/10.0/i586/Mandrake/RPMS2 with ../base/synthesis.hdlist2.cz

urpmi.addmedia Disk_3 http://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/10.0/i586/Mandrake/RPMS3 with ../base/synthesis.hdlist3.cz

urpmi.addmedia update_source http://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/updates/10.0/RPMS with ../base/synthesis.hdlist.cz


Then do:

urpmi.update -a
urpmi --auto-select


You will get all updates except the kernel. I always download and upgrade my kernel by hand ... to get the lastest on go here and get the kernel that matches your machine ... probably either:

kernel-2.4.25.3mdk-1-1mdk.i586.rpm

or

kernel-2.6.3.8mdk-1-1mdk.i586.rpm

...You can see which kernel you currently have with the command;

uname -r

For now, I would recommend staying in the same series (2.4.x or 2.6.x) that you currently use, just upgrade it to the latest version).

Once you download the kernel file, install it like this:

rpm -Uvh kernel-x.x.x.xmdk-1-1mdk.i586.rpm

(substitute the correct version, based on wether you downloaded the 2.4.x or 2.6.x kernel).

Once all the upgrades are complete, edit the file /etc/lilo.conf and make sure the linux section is pointing to your new kernel ... normally it points to /boot/vmlinuz and initrd is /boot/initrd.img (here is my lilo.conf):

CODE
# File generated by DrakX/drakboot
# WARNING: do not forget to run lilo after modifying this file

boot=/dev/hdb1
map=/boot/map
default="linux"
keytable=/boot/us.klt
prompt
nowarn
timeout=100
message=/boot/message
menu-scheme=wb:bw:wb:bw
disk=/dev/hdd bios=0x82
image=/boot/vmlinuz
 label="linux"
 root=/dev/hdb1
 initrd=/boot/initrd.img
 append="devfs=mount acpi=ht resume=/dev/hda3 splash=silent"
 vga=788
 read-only
image=/boot/vmlinuz
 label="linux-nonfb"
 root=/dev/hdb1
 initrd=/boot/initrd.img
 append="devfs=mount acpi=ht resume=/dev/hda3"
 read-only
image=/boot/vmlinuz
 label="failsafe"
 root=/dev/hdb1
 initrd=/boot/initrd.img
 append="failsafe acpi=ht resume=/dev/hda3 devfs=nomount"
 read-only
other=/dev/fd0
 label="floppy"
 unsafe

image=/boot/vmlinuz-2.6.3-7mdk
 label=linuxold
 root=/dev/hdb1
 read-only
 optional
 vga=788
 append=" devfs=mount acpi=ht resume=/dev/hda3 splash=silent"
 initrd=/boot/initrd-2.6.3-7mdk.img


Then make sure the /boot directory has the files vmlinuz and initrd.img pointing to the correct (new) kernel ... like this:

ls -al /boot

Here is my result:
CODE
total 6036
-rw-r--r--  1 root root     512 Mar 29 23:37 boot.0341
lrwxrwxrwx  1 root root      17 Apr 21 18:38 config -> config-2.6.3-8mdk
-rw-r--r--  1 root root   54087 Mar 17 08:58 config-2.6.3-7mdk
-rw-r--r--  1 root root   54087 Apr  3 10:42 config-2.6.3-8mdk
-rw-r--r--  1 root root    5032 Feb 19 11:03 diag1.img
-rw-r--r--  1 root root   16796 Feb 19 11:03 diag2.img
drwxr-xr-x  2 root root     448 Apr 17 07:10 grub/
-rw-r--r--  1 root root  172723 Mar 30 06:13 initrd-2.6.3-7mdk.img
-rw-r--r--  1 root root  173652 Apr 17 06:38 initrd-2.6.3-8mdk.img
lrwxrwxrwx  1 root root      21 Apr 17 06:38 initrd.img -> initrd-2.6.3-8mdk.img
lrwxrwxrwx  1 root root      25 Apr 21 18:38 kernel.h -> /boot/kernel.h-2.6.3-8mdk
-rw-r--r--  1 root root     537 Mar 30 06:21 kernel.h-2.6.3-7mdk
-rw-r--r--  1 root root     537 Apr 18 05:47 kernel.h-2.6.3-8mdk
-rw-------  1 root root  531968 Apr 18 05:45 map
lrwxrwxrwx  1 root root      15 Mar 29 23:37 message -> message-graphic
-rw-r--r--  1 root root  442273 Apr 17 06:38 message-graphic
-rw-r--r--  1 root root     116 Mar 29 23:37 message-text
lrwxrwxrwx  1 root root      21 Apr 17 06:41 System.map -> System.map-2.6.3-8mdk
-rw-r--r--  1 root root  898908 Mar 17 08:58 System.map-2.6.3-7mdk
-rw-r--r--  1 root root  898908 Apr  3 10:42 System.map-2.6.3-8mdk
-rw-r--r--  1 root root     256 Mar 29 23:37 us.klt
lrwxrwxrwx  1 root root      18 Apr 17 06:38 vmlinuz -> vmlinuz-2.6.3-8mdk
-rw-r--r--  1 root root 1440198 Mar 17 08:58 vmlinuz-2.6.3-7mdk
-rw-r--r--  1 root root 1440201 Apr  3 10:42 vmlinuz-2.6.3-8mdk


If all looks fairly well, run the command:

lilo

if there are no errors, reboot and try the new kernel...see if that fixes your sound issue.

(btw, I added the last section to also be able to boot from the old kernel ... just in case something happens ... after a couple weeks, I normally remove the older kernel).


--------------------
Johnny Hughes
hughesjr@linuxhelp.net
Enterprise Alternatives: CentOS, WhiteBoxEL
Favorite Workstation Distros (in order): CentOS, Gentoo, Debian Sarge, Ubuntu, Mandrake, FedoraCore, Slackware, SUSE
Favorite Server Distros (in order): CentOS, WhiteBoxEL, Debian Sarge, Slackware, Mandrake, FedoraCore, Gentoo, SUSE
Go to the top of the page
 
+Quote Post
particle
post Apr 22 2004, 08:22 AM
Post #6


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



more info:


i found the source of the simptom: the "PCM" (what is that?) in KMix - when its enabled and over 3/4 "raised" it creates the beeeeeeeeep sound that "evolves" in much worser sounding beeping sound (changes frequency) as i raise the bar more.

THANKS for the tip finegan [from linuxquestions.org]!!!

i dont want to stop here - i want to learn and anhilate the problem thats causing the the PCM to make the horible sound, especialy as i need to record some stuff of the tape deck and this could cause problems..i forsee

TIA!!!
Go to the top of the page
 
+Quote Post
particle
post Apr 22 2004, 08:29 AM
Post #7


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



QUOTE (hughesjr @ Apr 22 2004, 06:52 AM)
I have a very similar test machine (it is a VIA Apollo PRO133x, PIII 800mhz machine with a soundblaster live).

I haven't had any problems with sound at all.

Have you upgraded to the latest packages from Mandrake ...

No sir - i have not yet upgraded... i have mandrake 10...updates are already avalable? even for kernel? wow! i didnt think M10 was out for THAT long.

i remember installing m10 2 weeks prior on the same machine with same CD:
i dont remember the beep sound:
1) it wasnt there
2) my speakers were off

(lol ^^^ usefull info eh?!)


i guess i will start the upgrade - i never done nething like this so i think i will have more questions about the upgrade...so please stay with me...
Go to the top of the page
 
+Quote Post
particle
post Apr 22 2004, 08:38 AM
Post #8


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



if its posible please include explination of commands, i would like to learn the purpouse of my actions in detail rather doing them blindly.
Go to the top of the page
 
+Quote Post
particle
post Apr 22 2004, 08:45 AM
Post #9


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



urpmi.removemedia -a
CODE
using different removable device [/dev/hdc] for "Installation CD 1 (x86) (cdrom1                                    )"
using different removable device [/dev/hdc] for "Installation CD 2 (x86) (cdrom2                                    )"
using different removable device [/dev/hdc] for "Installation CD 3 (x86) (cdrom3                                    )"
using different removable device [/dev/hdc] for "Installation CD 4 (x86) (cdrom4                                    )"
removing medium "Installation CD 1 (x86) (cdrom1)"
removing medium "Installation CD 2 (x86) (cdrom2)"
removing medium "Installation CD 3 (x86) (cdrom3)"
removing medium "Installation CD 4 (x86) (cdrom4)"
found 0 headers in cache
removing 0 obsolete headers in cache
write config file [/etc/urpmi/urpmi.cfg]


urpmi.addmedia Disk_1 http://mirrors.usc.edu/pub/linux/distribut...6/Mandrake/RPMS with ../base/synthesis.hdlist.cz
CODE
added medium Disk_1
computing md5sum of existing source hdlist (or synthesis)
retrieving source hdlist (or synthesis) of "Disk_1"...
   http://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/10.0/i586/Mandrake/base/synthesis.hdlist.cz
found probed hdlist (or synthesis) as ../base/synthesis.hdlist.cz
...retrieving done
examining hdlist file [/var/cache/urpmi/partial/hdlist.Disk_1.cz]
examining synthesis file [/var/cache/urpmi/partial/hdlist.Disk_1.cz]
examining pubkey file of "Disk_1"...
...imported key 70771ff3 from pubkey file of "Disk_1"
found 0 headers in cache
removing 0 obsolete headers in cache
write config file [/etc/urpmi/urpmi.cfg]


urpmi.addmedia Disk_2 http://mirrors.usc.edu/pub/linux/distribut.../Mandrake/RPMS2 with ../base/synthesis.hdlist2.cz
CODE
added medium Disk_2
examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Disk_1.cz]
computing md5sum of existing source hdlist (or synthesis)
retrieving source hdlist (or synthesis) of "Disk_2"...
   http://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/10.0/i586/Mandrake/base/synthesis.hdlist2.cz
found probed hdlist (or synthesis) as ../base/synthesis.hdlist2.cz
...retrieving done
examining hdlist file [/var/cache/urpmi/partial/hdlist.Disk_2.cz]
examining synthesis file [/var/cache/urpmi/partial/hdlist.Disk_2.cz]
examining pubkey file of "Disk_2"...
...imported key 78d019f5 from pubkey file of "Disk_2"
performing second pass to compute dependencies

examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Disk_1.cz]
examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Disk_2.cz]
found 0 headers in cache
removing 0 obsolete headers in cache
write config file [/etc/urpmi/urpmi.cfg]


urpmi.addmedia Disk_3 http://mirrors.usc.edu/pub/linux/distribut.../Mandrake/RPMS3 with ../base/synthesis.hdlist3.cz
CODE
examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Disk_1.cz]
examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Disk_2.cz]
computing md5sum of existing source hdlist (or synthesis)
retrieving source hdlist (or synthesis) of "Disk_3"...
   http://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/10.0/i586/Mandrake/base/synthesis.hdlist3.cz
found probed hdlist (or synthesis) as ../base/synthesis.hdlist3.cz
...retrieving done
examining hdlist file [/var/cache/urpmi/partial/hdlist.Disk_3.cz]
examining synthesis file [/var/cache/urpmi/partial/hdlist.Disk_3.cz]
examining pubkey file of "Disk_3"...
...imported key c431416d from pubkey file of "Disk_3"
performing second pass to compute dependencies

examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Disk_1.cz]
examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Disk_2.cz]
examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Disk_3.cz]
found 0 headers in cache
removing 0 obsolete headers in cache
write config file [/etc/urpmi/urpmi.cfg]


urpmi.addmedia update_source http://mirrors.usc.edu/pub/linux/distribut...dates/10.0/RPMS with ../base/synthesis.hdlist.cz
CODE
.added medium update_source
examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Disk_1.cz]
examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Disk_2.cz]
examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Disk_3.cz]
retrieving source hdlist (or synthesis) of "update_source"...
   http://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/updates/10.0/base/synthesis.hdlist.cz
found probed hdlist (or synthesis) as ../base/synthesis.hdlist.cz
...retrieving done
examining hdlist file [/var/cache/urpmi/partial/hdlist.update_source.cz]
examining synthesis file [/var/cache/urpmi/partial/hdlist.update_source.cz]
writing list file for medium "update_source"
examining pubkey file of "update_source"...
...imported key 22458a98 from pubkey file of "update_source"
found 0 headers in cache
removing 0 obsolete headers in cache
write config file [/etc/urpmi/urpmi.cfg]
Go to the top of the page
 
+Quote Post
particle
post Apr 22 2004, 10:02 AM
Post #10


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



urpmi.update -a
CODE
computing md5sum of existing source hdlist (or synthesis)
examining MD5SUM file
retrieving source hdlist (or synthesis) of "Disk_1"...
   http://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/10.0/i586/Mandrake/base/synthesis.hdlist.cz
computing md5sum of retrieved source hdlist (or synthesis)
...retrieving failed: md5sum mismatch
retrieval of source hdlist (or synthesis) failed
no hdlist file found for medium "Disk_1"
examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Disk_1.cz]
computing md5sum of existing source hdlist (or synthesis)
examining MD5SUM file
retrieving source hdlist (or synthesis) of "Disk_2"...
   http://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/10.0/i586/Mandrake/base/synthesis.hdlist2.cz
computing md5sum of retrieved source hdlist (or synthesis)
...retrieving failed: md5sum mismatch
retrieval of source hdlist (or synthesis) failed
no hdlist file found for medium "Disk_2"
examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Disk_2.cz]
computing md5sum of existing source hdlist (or synthesis)
examining MD5SUM file
retrieving source hdlist (or synthesis) of "Disk_3"...
   http://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/10.0/i586/Mandrake/base/synthesis.hdlist3.cz
computing md5sum of retrieved source hdlist (or synthesis)
...retrieving failed: md5sum mismatch
retrieval of source hdlist (or synthesis) failed
no hdlist file found for medium "Disk_3"
examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Disk_3.cz]
retrieving source hdlist (or synthesis) of "update_source"...
   http://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/updates/10.0/base/synthesis.hdlist.cz
...retrieving done
examining synthesis file [/var/cache/urpmi/partial/hdlist.update_source.cz]
writing list file for medium "update_source"
found 0 headers in cache
removing 0 obsolete headers in cache
write config file [/etc/urpmi/urpmi.cfg]


urpmi --auto-select

too much to paste....BUT here what it has downloaded:

CODE
To satisfy dependencies, the following packages are going to be installed (455 MB):
XFree86-4.3-30mdk.i586
XFree86-75dpi-fonts-4.3-30mdk.i586
XFree86-cyrillic-fonts-4.3-30mdk.i586
XFree86-server-4.3-30mdk.i586
XFree86-xfs-4.3-30mdk.i586
alsa-utils-1.0.2-2mdk.i586
bind-utils-9.2.3-6mdk.i586
bootsplash-2.1.5-1mdk.i586
cdialog-0.9b-4mdk.i586
cdrecord-2.01-0.a27.2mdk.i586
cups-drivers-1.1-133mdk.i586
devfsd-1.3.25-37mdk.i586
drakconf-10-12mdk.i586
drakfirsttime-1.0-1mdk.noarch
drakxtools-10-29mdk.i586
drakxtools-newt-10-29mdk.i586
dynamic-0.12.4-1mdk.noarch
foomatic-db-3.0.1-0.20040302.3mdk.i586
foomatic-db-engine-3.0.1-0.20040302.3mdk.i586
foomatic-filters-3.0.1-0.20040302.3mdk.i586
ftp-client-krb5-1.3-6mdk.i586
ghostscript-7.07-14mdk.i586
ghostscript-module-X-7.07-14mdk.i586
gimpprint-4.2.6-16mdk.i586
gnome-mime-data-2.4.1-5mdk.i586
gnome-vfs2-2.4.2-4mdk.i586
gurpmi-4.4.5-10mdk.noarch
harddrake-10-29mdk.i586
harddrake-ui-10-29mdk.i586
hexedit-1.2.9-1mdk.i586
hotplug-2004_01_05-5mdk.i586
icewm-light-1.2.14-0.pre11.1mdk.i586
indexhtml-10.0-11mdk.noarch
initscripts-7.06-49mdk.i586
kdeaddons-searchbar-3.2-15mdk.i586
kdebase-common-3.2-79mdk.i586
kdebase-kdm-3.2-79mdk.i586
kdebase-kdm-config-file-3.2-79mdk.i586
kdebase-konsole-3.2-79mdk.i586
kdebase-nsplugins-3.2-79mdk.i586
kdebase-progs-3.2-79mdk.i586
kdebase-servicemenu-10.0-7mdk.noarch
kdegraphics-kghostview-3.2-15mdk.i586
kdelibs-common-3.2-36mdk.i586
kdemultimedia-common-3.2-14mdk.i586
kdemultimedia-kaudiocreator-3.2-14mdk.i586
kdemultimedia-kmix-3.2-14mdk.i586
kdemultimedia-kscd-3.2-14mdk.i586
kdenetwork-kdict-3.2-17.1.100mdk.i586
kdenetwork-kppp-3.2-17.1.100mdk.i586
kdepim-common-3.2-32mdk.i586
kdepim-kaddressbook-3.2-32mdk.i586
kdepim-karm-3.2-32mdk.i586
kdepim-kmail-3.2-32mdk.i586
kdepim-knode-3.2-32mdk.i586
kdepim-knotes-3.2-32mdk.i586
kdepim-kontact-3.2-32mdk.i586
kdepim-korganizer-3.2-32mdk.i586
kdetoys-kweather-3.2-6mdk.i586
kdeutils-ark-3.2-18.1.100mdk.i586
kdeutils-kcalc-3.2-18.1.100mdk.i586
kdeutils-kcharselect-3.2-18.1.100mdk.i586
kdeutils-kdepasswd-3.2-18.1.100mdk.i586
kdeutils-kfloppy-3.2-18.1.100mdk.i586
ldetect-lst-0.1.9-13mdk.i586
libbonoboui-2.4.3-3mdk.i586
libbonoboui2_0-2.4.3-3mdk.i586
libgimpprint1-4.2.6-16mdk.i586
libgnome-vfs2_0-2.4.2-4mdk.i586
libgpm1-1.20.1-10mdk.i586
libijs0-0.34-71mdk.i586
libkdebase4-3.2-79mdk.i586
libkdebase4-kate-3.2-79mdk.i586
libkdebase4-konsole-3.2-79mdk.i586
libkdebase4-nsplugins-3.2-79mdk.i586
libkdecore4-3.2-36mdk.i586
libkdecore4-devel-3.2-36mdk.i586
libkdemultimedia1-common-3.2-14mdk.i586
libkdemultimedia1-kmix-3.2-14mdk.i586
libkdemultimedia1-kscd-3.2-14mdk.i586
libkdepim2-common-3.2-32mdk.i586
libkdepim2-kaddressbook-3.2-32mdk.i586
libkdepim2-kmail-3.2-32mdk.i586
libkdepim2-knode-3.2-32mdk.i586
libkdepim2-kontact-3.2-32mdk.i586
libkdepim2-korganizer-3.2-32mdk.i586
libkdepim2-kpilot-3.2-32mdk.i586
libkdesdk1-3.2-11mdk.i586
libkdesdk1-devel-3.2-11mdk.i586
libkdetoys1-3.2-6mdk.i586
libkdetoys1-devel-3.2-6mdk.i586
libkdetoys1-kweather-3.2-6mdk.i586
libkdeutils1-ark-3.2-18.1.100mdk.i586
libkdeutils1-kcalc-3.2-18.1.100mdk.i586
libkrb51-1.3-6mdk.i586
libldap2-2.1.25-6mdk.i586
libnautilus2-2.4.2-4mdk.i586
libnet-snmp5-5.1-7mdk.i586
libopenssl0.9.7-0.9.7c-3mdk.i586
libpcre0-4.5-3mdk.i586
libpcre0-devel-4.5-3mdk.i586
libqt3-3.2.3-17.1.100mdk.i586
libqt3-devel-3.2.3-17.1.100mdk.i586
libsasl2-2.1.15-10mdk.i586
libuim0-0.2.8-5mdk.i586
libuser-0.51.7-9mdk.i586
libuser1-0.51.7-9mdk.i586
libutempter0-0.5.2-12.2.100mdk.i586
libxfree86-4.3-30mdk.i586
libxfree86-devel-4.3-30mdk.i586
libxine1-1-0.rc3.6mdk.i586
libxmms1-1.2.9-4mdk.i586
locales-2.3.3-5mdk.i586
locales-br-2.3.3-5mdk.i586
locales-ca-2.3.3-5mdk.i586
locales-de-2.3.3-5mdk.i586
locales-en-2.3.3-5mdk.i586
locales-es-2.3.3-5mdk.i586
locales-fo-2.3.3-5mdk.i586
locales-fr-2.3.3-5mdk.i586
locales-he-2.3.3-5mdk.i586
locales-hu-2.3.3-5mdk.i586
locales-it-2.3.3-5mdk.i586
locales-ro-2.3.3-5mdk.i586
locales-sv-2.3.3-5mdk.i586
locales-zh-2.3.3-5mdk.i586
magicdev-1.1.5-6mdk.i586
mandrake-doc-common-10.0-3mdk.noarch
mandrake-menu-directory-1.0-42mdk.noarch
mandrake-release-10.0-3mdk.i586
mandrakegalaxy-10.0-13mdk.i586
mdk-menu-messages-10.0-6mdk.i586
mdkkdm-9.2-21mdk.i586
mdklaunchhelp-9.2-7mdk.i586
menu-2.1.9-22mdk.i586
menudrake-0.7.4-7mdk.i586
mkinitrd-3.5.18-4.1.100mdk.i586
mkisofs-2.01-0.a27.2mdk.i586
module-init-tools-3.0-1mdk.i586
mountloop-0.11.5-1mdk.i586
msec-0.42.1-1mdk.i586
nautilus-2.4.2-4mdk.i586
net-tools-1.60-10mdk.i586
netprofile-0.6.3-1mdk.noarch
nmap-3.50-3mdk.i586
openldap-2.1.25-6mdk.i586
openssl-0.9.7c-3mdk.i586
perl-Gtk2-1.023-3mdk.i586
perl-Libconf-0.27-1mdk.noarch
printer-filters-1.0-133mdk.i586
printer-testpages-1.0-133mdk.i586
printer-utils-1.0-133mdk.i586
qt3-common-3.2.3-17.1.100mdk.i586
rpmdrake-2.1.2-12mdk.i586
telnet-client-krb5-1.3-6mdk.i586
tightvnc-1.2.9-2mdk.i586
uim-0.2.8-5mdk.i586
uim-applet-0.2.8-5mdk.i586
usermode-1.63-10mdk.i586
usermode-consoleonly-1.63-10mdk.i586
utempter-0.5.2-12.2.100mdk.i586
xchat-2.0.7-6.1.100mdk.i586
xine-arts-1-0.rc3.6mdk.i586
xine-plugins-1-0.rc3.6mdk.i586
xmms-1.2.9-4mdk.i586
xsane-0.92-2mdk.i586
xsane-gimp-0.92-2mdk.i586
yelp-2.4.2-4mdk.i586
Go to the top of the page
 
+Quote Post
particle
post Apr 22 2004, 10:05 AM
Post #11


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



QUOTE (hughesjr @ Apr 22 2004, 06:52 AM)
You will get all updates except the kernel. I always download and upgrade my kernel by hand ... to get the lastest on go here and get the kernel that matches your machine ... probably either:

kernel-2.4.25.3mdk-1-1mdk.i586.rpm

or

kernel-2.6.3.8mdk-1-1mdk.i586.rpm

i saw a i686 and up kernel.... what ix86 is P4 platform considered?
Go to the top of the page
 
+Quote Post
particle
post Apr 22 2004, 10:07 AM
Post #12


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



hmm...all the GUI "shell" font got huge and changed font i think...well i know it got big:

like the "location, edit, view etc.. and the name of the documents and status bar..

this happnd after the update.

please explain what/why this happnd ..i'm hoping after restart it will noralize

TIA!
Go to the top of the page
 
+Quote Post
particle
post Apr 22 2004, 10:18 AM
Post #13


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



rpm -Uvh kernel-2.6.3.8mdk-1-1mdk.i586.rpm


CODE
Preparing...                ########################################### [100%]
  1:kernel-2.6.3.8mdk      ########################################### [100%]
[root@avalon Documents]#
Go to the top of the page
 
+Quote Post
particle
post Apr 22 2004, 10:24 AM
Post #14


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



ls -al /boot


CODE
total 6008
drwxr-xr-x   3 root root    4096 Apr 22 11:31 ./
drwxr-xr-x  18 root adm     4096 Apr 22  2004 ../
-rw-r--r--   1 root root     512 Apr 21 21:20 boot.0300
lrwxrwxrwx   1 root root      17 Apr 22  2004 config -> config-2.6.3-4mdk
-rw-r--r--   1 root root   54068 Mar  2 01:27 config-2.6.3-4mdk
-rw-r--r--   1 root root   54087 Apr  3 11:42 config-2.6.3-8mdk
-rw-r--r--   1 root root    5032 Feb 19 12:03 diag1.img
-rw-r--r--   1 root root   16796 Feb 19 12:03 diag2.img
drwxr-xr-x   2 root root    4096 Apr 21 21:08 grub/
-rw-r--r--   1 root root  137033 Apr 21 21:20 initrd-2.6.3-4mdk.img
-rw-r--r--   1 root root  136127 Apr 22 11:31 initrd-2.6.3-8mdk.img
lrwxrwxrwx   1 root root      21 Apr 22 11:31 initrd.img -> initrd-2.6.3-8mdk.img
lrwxrwxrwx   1 root root      25 Apr 22 09:06 kernel.h -> /boot/kernel.h-2.6.3-4mdk
-rw-r--r--   1 root root     537 Apr 22 01:25 kernel.h-2.6.3-4mdk
-rw-------   1 root root  532992 Apr 22 11:31 map
lrwxrwxrwx   1 root root      15 Apr 21 21:20 message -> message-graphic
-rw-r--r--   1 root root  442273 Apr 22 11:31 message-graphic
-rw-r--r--   1 root root     116 Apr 21 21:20 message-text
lrwxrwxrwx   1 root root      21 Apr 22 01:25 System.map -> System.map-2.6.3-4mdk
-rw-r--r--   1 root root  898362 Mar  2 01:27 System.map-2.6.3-4mdk
-rw-r--r--   1 root root  898908 Apr  3 11:42 System.map-2.6.3-8mdk
-rw-r--r--   1 root root     256 Apr 21 21:20 us.klt
lrwxrwxrwx   1 root root      18 Apr 22 11:31 vmlinuz -> vmlinuz-2.6.3-8mdk
-rw-r--r--   1 root root 1437568 Mar  2 01:27 vmlinuz-2.6.3-4mdk
-rw-r--r--   1 root root 1440201 Apr  3 11:42 vmlinuz-2.6.3-8mdk


idk if this looks fairly well...

lilo

CODE
Added linux *
Added linux-nonfb
Added failsafe
Added windows
Added floppy
Added 263-8


i'm going to restart....now *xrosses fingers*
Go to the top of the page
 
+Quote Post
particle
post Apr 22 2004, 10:32 AM
Post #15


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



EVERY THING IS BIG - FONT BECAME HUGE!!!!

on everything - from login prompt to website text!!!!

ahhh!!!!

lol i guess ima try to figure out how to make it smaller - any ideas?
Go to the top of the page
 
+Quote Post
particle
post Apr 22 2004, 10:58 AM
Post #16


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



HEEELP!!!!

i'm back in winblows cause i cant load in gui in linux....


i set resolution...well i think i set it too high to tempereraly get rid of the font problem now i cant boot into gui and i dont know my way in console mode.


oh and after the update i checked the pcm slider in KMix and the beep is still there.


why the font problem? and what have i done wrong?
Go to the top of the page
 
+Quote Post
hughesjr
post Apr 23 2004, 05:07 AM
Post #17


Its GNU/Linuxhelp.net
*******

Group: Admin
Posts: 3,433
Joined: 25-July 03
From: Corpus Chrsiti, TX, USA
Member No.: 1,151



OK ...

I'm not sure that this is a problem with Kmix. The PCM slider is the main output of sound, which is all sound. So it could be the sound driver that is hosed up.... or it could be a startup process in KDE.

First, lets get your video fixed.

If you get to the console login prompt when you try to start Linux, login as root and run the command:

XFdrake

This will let you change and test your video settings....

If you can't get to the console prompt, then do this in the bootup.... at the lilo prompt, press Esc, then type the command:

linux 3

This should start you up in runlevel 3, which in Mandrake (and most other linux distros) is Console multi-user mode.

You should then be able to setup your vieo card with XFdrake.
------------------------------------------------------------------------------------
When you get X working, we can try to fix your sound.

I have all the Mandrake 10 updates and I am not having any issues with fonts or sound .... with either KDE or GNOME. I'm sure we can get it fixed.

I was hoping the new Kernel drivers would fix you sound problems.


--------------------
Johnny Hughes
hughesjr@linuxhelp.net
Enterprise Alternatives: CentOS, WhiteBoxEL
Favorite Workstation Distros (in order): CentOS, Gentoo, Debian Sarge, Ubuntu, Mandrake, FedoraCore, Slackware, SUSE
Favorite Server Distros (in order): CentOS, WhiteBoxEL, Debian Sarge, Slackware, Mandrake, FedoraCore, Gentoo, SUSE
Go to the top of the page
 
+Quote Post
hughesjr
post Apr 23 2004, 05:14 AM
Post #18


Its GNU/Linuxhelp.net
*******

Group: Admin
Posts: 3,433
Joined: 25-July 03
From: Corpus Chrsiti, TX, USA
Member No.: 1,151



Also ... do you have gnome installed? If so, try to login to gnome from the GUI login screen (after you get X working again) and see if the gnome fonts are also messed up.

You can login to gnome (if it is installed) at the Main GUI login screen, by selecting Menu then Session Type, then GNOME.

Then login as usual.


--------------------
Johnny Hughes
hughesjr@linuxhelp.net
Enterprise Alternatives: CentOS, WhiteBoxEL
Favorite Workstation Distros (in order): CentOS, Gentoo, Debian Sarge, Ubuntu, Mandrake, FedoraCore, Slackware, SUSE
Favorite Server Distros (in order): CentOS, WhiteBoxEL, Debian Sarge, Slackware, Mandrake, FedoraCore, Gentoo, SUSE
Go to the top of the page
 
+Quote Post
particle
post Apr 27 2004, 09:14 AM
Post #19


Whats this Lie-nix Thing?
*

Group: Members
Posts: 15
Joined: 21-April 04
Member No.: 2,807



i'mback in gui.

i dont have gnome (idk y not as i remember installing it...), but i have another gui that has the font sizes right.



whats next?

TIA

</e>
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 17th December 2017 - 02:44 PM