Linux Help
guides forums blogs
Home Desktops Distributions ISO Images Logos Newbies Reviews Software Support & Resources Linuxhelp Wiki

Welcome Guest ( Log In | Register )



Advanced DNS Management
New ZoneEdit. New Managment.

FREE DNS Is Back

Sign Up Now
 
Reply to this topicStart new topic
> X-cd-roast 0.98alpha15 Problem, a gui frontend for cdrecord, mkisofs
Robert83
post Feb 20 2004, 08:48 AM
Post #1


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,439
Joined: 3-January 04
From: Germany
Member No.: 2,069



Hi,

So I've downloaded the source file ./configure make make install everything went fine smile.gif , then started the program from console by typing xcdroast.

Now the problem is quiet anyoing, I will include outputs in this post.

I can only erase rewritable cd-roms with this, I've tryied to manually add my cd-writer by /dev/sg0 and it detected it, and even automatic detect detected it on sci 0,0,0 ...wich is also reported by cdrecord scanbus 0,0,0 TeacW516EB.
[As I mentioned earlier I can write cd's from console with cdrecord on 0,0,0 ...]

here are the outputs...

any ideas?

[this is what happens when writing to a rewritable or writeable, or simulating]
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,0,0" gracetime=2 fs=4096k driveropts=burnfree -v -useinfo speed=10 -eject -multi -pad -data "/robi/track-01.iso" ...

scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
pregap1: -1
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright © 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'TEAC '
Identifikation : 'CD-W516EB '
Revision : '1.0B'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1674624 = 1635 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 371 MB padsize: 30 KB
Total size: 426 MB (42:14.62) = 190097 sectors
Lout start: 426 MB (42:16/47) = 190097 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 336075 (74:43/00)
1T speed low: 4 1T speed high: 10
2T speed low: 2 2T speed high: 10
power mult factor: 2 6
recommended erase/write power: 5
A1 values: 24 2C DC
A2 values: 14 A4 4A
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 145978
Starting to write CD/DVD at speed 10 in real TAO mode for multi session.
Waiting for reader process to fill input buffer ...
input buffer ready.
BURN-Free is ON.
Performing OPC...
Starting new track at sector: 0
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 1F 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 29 00 00 00
Sense Key: 0x6 Unit Attention, Segment 0
Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.836s timeout 40s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00

write track data: error after 63488 bytes
Writing time: 18.043s
Average write speed 250.7x.
Fixating...
Fixating time: 32.460s
cdrecord: fifo had 65 puts and 2 gets.
cdrecord: fifo was 0 times empty and 1 times full, min fill was 98%.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ATIP (absolute Time in Pregroove)-Information :
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable <CAV>
media (1)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 336075 (74:43/00)
1T speed low: 4 1T speed high: 10
2T speed low: 2 2T speed high: 10
power mult factor: 2 6
recommended erase/write power: 5
A1 values : 24 2C DC
A2 values : 14 A4 4A
Disk type : Phase change
Manuf. index : 11
Manufacturer : Mitsubishi Chemical Corporation
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Sincerely
Robert B


--------------------
Robert Becskei
robert83@linuxhelp.net
--------------------
May the source be with us!
--------------------
AMD X2-3800 @ 2400Mhz
2048MB DDR 400Mhz
DFI Lanparty UT4 NF4 ULTRA-D
GeForce 7800GT
250GB+250GB
Pioneer DVD-RW
17inch Samsung Syncmaster 757NF
WinXP Pro (SP2)/ CentOS 4.3
--------------------
Go to the top of the page
 
+Quote Post
hughesjr
post Feb 20 2004, 09:02 PM
Post #2


Its GNU/Linuxhelp.net
*******

Group: Admin
Posts: 3,433
Joined: 25-July 03
From: Corpus Chrsiti, TX, USA
Member No.: 1,151



I'm not sure what the problem is ... I just wrote a cd using the same command your system issued...

cdrecord dev= "0,0,0" gracetime=2 fs=4096k driveropts=burnfree -v -useinfo speed=10 -eject -multi -pad -data "systemrescuecd-x86-0.2.9.iso"

(all on one line)

I had no problem with the write...it completed satisfactorily.

Try issueing that command (replace the name of the data iso file) ...


--------------------
Johnny Hughes
hughesjr@linuxhelp.net
Enterprise Alternatives: CentOS, WhiteBoxEL
Favorite Workstation Distros (in order): CentOS, Gentoo, Debian Sarge, Ubuntu, Mandrake, FedoraCore, Slackware, SUSE
Favorite Server Distros (in order): CentOS, WhiteBoxEL, Debian Sarge, Slackware, Mandrake, FedoraCore, Gentoo, SUSE
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 22nd October 2017 - 07:54 PM