Linux Help
guides forums blogs
Home Desktops Distributions ISO Images Logos Newbies Reviews Software Support & Resources Linuxhelp Wiki

Welcome Guest ( Log In | Register )



Advanced DNS Management
New ZoneEdit. New Managment.

FREE DNS Is Back

Sign Up Now
> Suggestions for network setup, Can I do this automatically?
nelgin
post Mar 21 2013, 02:01 PM
Post #1


Whats this Lie-nix Thing?
*

Group: Members
Posts: 1
Joined: 21-March 13
Member No.: 18,178



I'm struggling to find the right combination to get this up and running automatically so thought I'd post here.

Background: I have Veriozon FiOS. The router they gave me only has 100mb/s ports, whereas my home network is Gigabit between the computers. I have the computers plugged into a gigabit router which then connects to the FiOS device.

Router IP: 192.168.1.254
Linux IP: 192.168.1.1

When I configure /etc/sysconfig/network with GATEWAY=192.168.1.254 and ifcfg-eth0 for IPADDR=192.168.1.1 then all is fine, except the route is automatically calculated to go through 192.168.1.254. That means all the traffic goes up through the 100mb/s ports and back down.

CODE
[root@wibble network-scripts]# netstat -rn
Kernel IP routing table

Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
192.168.1.0   0.0.0.0         255.255.255.0   U         0 0          0 eth0
169.254.0.0   0.0.0.0         255.255.0.0     U         0 0          0 eth0
0.0.0.0           192.168.1.254   0.0.0.0         UG        0 0          0 eth0


Anyway, what I would really like is for traffic for 192.168.1.0 to go through 192.168.1.1 and then the default route to be 192.168.1.254.

I've tried several conbinations and don't seem to figure the right recipe. Any advice would be appreciated.

Thanks,
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
michaelk
post Mar 22 2013, 07:05 AM
Post #2


Its GNU/Linuxhelp.net
*******

Group: Support Specialist
Posts: 1,797
Joined: 23-January 03
Member No.: 360



An alternative if possible would be to configure the FIOS router as a bridge. The router part is disabled so it appears only as a MODEM. Now your router will have a real WAN address and no more traffic issues.
Go to the top of the page
 
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 23rd October 2017 - 12:17 PM