Linux Help
guides forums blogs
Home Desktops Distributions ISO Images Logos Newbies Reviews Software Support & Resources Linuxhelp Wiki

Welcome Guest ( Log In | Register )



Advanced DNS Management
New ZoneEdit. New Managment.

FREE DNS Is Back

Sign Up Now

1Way
Posted on: Dec 3 2003, 02:15 AM


Whats this Lie-nix Thing?
*

Group: Members
Posts: 1
Joined: 3-December 03
Member No.: 1,894


Hello all, this is my first post on your forum, and it looks like a very well setup forum, I look forward to more from this site.

Iíve loaded Suse pro 9.0 CD roms a few times now (6 or so), after win XP, on a mobo w/silicon image serial raid controller with 2 seagate 80ís striped as one (raid 0). It found my hard drives as one raid drive just fine since I had my diskette that I made for winXP with the motherboard drivers for the serial and raid drivers on it. No problem there.(!)

The main (first) problem is that the hard drive seems to work very slow. It takes about 2.4 minuets to boot (and that is after the hardware boots)! Isnít that way too long to boot? How long is your boot? My XP loads in about 30 seconds or less.

I did some web surfing and found that apparently it has to do with the DMA mode being shut off, in one article/post he said turning on DMA made his hard drive up to 50 times faster. How do I benchmarch or speed check my hard drive throughput?

I have a brand new system, a

gigabyte 7nnxp, nvidia chipset w/AMD athlon 2500xp
1 gig of (overly fast) duel channel ram
onboard raid controller by silicon image (Sil 3112ACT144)
2 Ė 80 gig serial seagate hdís
ATI All In Wonder 9800pro 128 MB ddr (<-- very nice, BUT SUSE doesnít recognize it as such, something like a radeon 350 instead, AND it does NOT have 3D support, NO 3D I say, I canít even see a single 3D game, arrrggg.)

(Of course all works great in Win XP.) (duck)

Here is how I started seeing the problem.
There is a place within Suse, KDE 3.1, system, then YaST, then hardware, then hard drive ide DMA mode, then it lists my two hard drives and a CD Rom drive. You can select a single item, and then at the bottom would be a scroll selection box to choose which DMA mode you want! All 3 devices currant status all said they were set to no DMA. So I thought I could activate some DMA and fly (Right?), but so far, every selection Iíve tried ends up making bootup crash, and one selection even crashed right away. Aarrgggg.


So I am seeking these things.


1 - How do I properly enter into the command line a statement to shut off the DMA mode so that I can at least use the system again without reinstalling everything? Even in the boot window installer (lilo, I think?) it has a kernel option to turn off the DMA mode, it says enter the following:

ide=nodma

I enter that at the bottom where it says, boot options and a long blank box for entering text, and it makes no difference, when I watch the boot text lines it ends up setting the DMA mode which I last used within booted linux and then shortly after that all goes downhill very quickly.

Am I supposed to enter the kernel option the statement AFTER making a command, like the following?

Linux ide=nodma

2 - How do I find out which DMA my system can use without destruction from within? wink.gif So far Iíve tried using the following

- Ultra DMA 133
- Ultra DMA 16
- DMA on (default)

The last two at least let me continue to operate until I decided to shut down, AND it seemed to make hard drive tasks run faster too. But then booting crashes before I get through it. The first option, UDMA 133, it stopped everything immediately.

(Here are all the other selections)

No change
DMA off
DMA On (default mode)
DMA/16
Ultra DMA/16
Ultra DMA/33
Ultra DMA/66
Ultra DMA/100
Ultra DMA/133


I partitioned the two 80 gigers in the following way.

WinXP got 100 gig, which left an unpartioned area of the remainder (about 58 gigs) for Linux.

Suse automatically set up a separate partition of 1 gig or so (?), something about it being an active swap area or something like that. I get no problems with the installs every time despite having hardware serial raid 0, pretty cool, I felt really fortunate since I saw some online help forum posts with problems loading linux on a hardware raid setup.

So the main problems are the DMA mode (hard drive slowness) and not being able to correct a DMA setting so that I can boot safely without crashing. The installs always automatically end up setting the DMA mode on the hard drive to OFF, and so naturally the hard drive tasks are really slow. BUMMER.

Is there a good dependable way to test the hard drive speed?

Assistance is much appreciated!
  Forum: Technical Support · Post Preview: #6533 · Replies: 1 · Views: 2,326


New Posts  New Replies
No New Posts  No New Replies
Hot topic  Hot Topic (New)
No new  Hot Topic (No New)
Poll  Poll (New)
No new votes  Poll (No New)
Closed  Locked Topic
Moved  Moved Topic
 

RSS Lo-Fi Version Time is now: 18th October 2017 - 04:22 AM