Printable Version of Topic

Click here to view this topic in its original format

Linuxhelp _ Hardware Support _ cant moun hdb

Posted by: psekkel Aug 5 2006, 12:14 PM

Hi, this is my first post in here. Sorry if it is in the wrong place.

Here's my drama:
i cannot mount one of my hd's (the one with all my files in it).
heres what happen:

mount: wrong fs type, bad option, bad superblock on /dev/hdb1,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

And when i run dmesg | tail:

hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=115343423, sector=115343360
end_request: I/O error, dev 03:41 (hdb), sector 115343360
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=115605567, sector=115605504
end_request: I/O error, dev 03:41 (hdb), sector 115605504
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=116129855, sector=116129792
end_request: I/O error, dev 03:41 (hdb), sector 116129792
IN=ppp0 OUT= MAC= SRC=201.68.205.231 DST=201.68.179.39 LEN=48 TOS=0x00 PREC=0x00 TTL=127 ID=49530 DF PROTO=TCP SPT=2030 DPT=445 WINDOW=64800 RES=0x00 SYN URGP=0


I have no idea what to do... and i cant lose all those files.
i would apreciate any help

Thanks
Pedro

Posted by: michaelk Aug 5 2006, 06:27 PM

Were you able to mount this partition in the past?
What distribution / version are you running?

Post the output of the command
fdisk -l /dev/hdb (must be root and that is a small L)

Posted by: psekkel Aug 6 2006, 01:41 PM

QUOTE (michaelk @ Aug 5 2006, 06:27 PM) *
Were you able to mount this partition in the past?
What distribution / version are you running?

Post the output of the command
fdisk -l /dev/hdb (must be root and that is a small L)


I was able to mount it once, using kurumin. Now i am using Slackware 10.2. ive tried to mount it using kurumin
live cd and it didnt work.
the output of the comand is:

Disk /dev/hdb: 61.4 GB, 61492838400 bytes
255 heads, 63 sectors/track, 7476 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/hdb1 1 7476 60050938+ 83 Linux

thanks

Posted by: michaelk Aug 7 2006, 06:17 AM

It is possible that the hard drive is failing.
What filesystem is this partiton?

I would get the diagnostic tools from the drive manufacture and see if it detects any problems.
If the drive checks out try fsck to see if it can fix the problems.

Posted by: psekkel Aug 7 2006, 07:32 PM

QUOTE (michaelk @ Aug 7 2006, 06:17 AM) *
It is possible that the hard drive is failing.
What filesystem is this partiton?

I would get the diagnostic tools from the drive manufacture and see if it detects any problems.
If the drive checks out try fsck to see if it can fix the problems.


It was supposed to be reiserfs butwhn i run the "parted" and check, this is what i get:
No Implementation: Support for opening reiserfs file systems is not implemented yet

where can i find the drive manufacture tools?

Thanks

Posted by: michaelk Aug 7 2006, 07:38 PM

QUOTE
where can i find the drive manufacture tools?

In general from the manufacture's website.

If you do not know the manufacture of the drive trythe following command:
dmesg | grep hdb

The | is the pipe command and is typically located above the \ key.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)